Recent content by ßill

R.I.P Yoda. You will not be forgotten

Won’t comment on the GS, but after 60k miles and 7 years on a set of GS/D3s on my ’90 ZR-1, I can’t complain about my GoodYears. :thumb

This won’t help the rough running problem, but will not the alcohol (ethanol) in modern fuel eliminate the water problem? You changed the filter, I’m guessing the one under the pass door? Did you also change the one in the tank? (Easy to do on a C4). Fuel pressure test will confirm or rule this...

Does it idle ok? When was the fuel filter changed? If it idles smooth or you don't know when the filter was changed then I'm leaning toward the filter as the culprit. Good luck

Has anyone noticed that after tinting windows on your car that the dash is hard to see because the back light is dim? If so what have you done to correct the problem? ;help

Thanks Scott. If you have leaks (even very small ones) it will find them. Just keep an eye on the level. It won't make the holes any bigger the leak rate will return to "normal" when you return to dino oil.

Why don't you want to run synthetic oil? It's not going to hurt your engine. The worse that might happen is you might burn/leak a little (more).

Switches in the steering wheel will have no affect on the theft operation of the horns. There are 2 fuses involved 5amp LCD fuse in the main fuse block and the 15amp theft fuse in the aux block, both will stop the horn from blowing. The horn relay is also suspect as are the horns themselves. I...

Thats me Bill. I had to limp all the way home on one fuel pump. I learned what it felt like to drive an L98 :W. It was still a great trip. Lots of memories. Glad you and Zach are building more Corvette memories. :cool

Funny you should ask, I waved at a C5 today while driving an Escalade. NO RESPONSE!:eyerole

Yes that is what I was asking. and yes I was there for CF '07 I needed repairs then. The funky ß is (ALT 225) ASCII character. And you call yourself a Geek? :D proof that I was there

Welcome back Bill. Good lookin vert. Is it a 2 top or just the rag top? Sounds like a few small things to keep you busy. Cant wait to hear your progress. another ßill

Pure water at 15Lbs PSIG will boil at 250ºF at 18Lbs it will boil at 256ºF. As long as the water is not allowed to reach boiling point the pressure cap will make no difference in the running temp.

Wait, doesn’t the UAW along with Obama own GM? They can pretty much do as they wish. Ford could be out of luck.

How do the kids say it "My bad". I missed your comment about size in your first post. The pictures are deceiving. They make the new wheel/tire combination much taller. :)