Welcome to the Corvette Forums at the Corvette Action Center!

Recent content by drsurvey

  1. D

    Help! Removing rear spring bolts from rear end housing on 74 vette

    :confused I have just rebuilt my rear trailing arms, bearings, etc.. I tried to remove the 4 bolts holding the rear spring, however they do not want to move! I am afraid of putting too...
  2. D

    Help! Repairing rear trailing arms

    Gary: I checked the U-Joints on the removed 1/2 shafts last night and the driver side moved freely, however when I tried the passenger side the U-Joints on the mounting flange that mounts to the spindle could hardly be moved with two hands. Could be the problem! I will let you know when I...
  3. D

    Help! Repairing rear trailing arms

    Gary: When I pulled the half shafts I get about 1/16" play at the differential housing. I get about 5 slight clicks per revolution of the half shafts. Thanks
  4. D

    Help! Repairing rear trailing arms

    Gary: Thanks for the information! Could a problem in the rear differential make a noise at the right rear wheel? When I had the car in neutral and turned the half shafts I get a slight click noise coming from the differential case. Is this common? The car would run great on the road but give a...
  5. D

    Help! Repairing rear trailing arms

    Right rear wheel grabs after driving I have a 74 vette that I have been restoring. Years back I would have a chirping noise coming from the right rear wheel after I drove the car fot a while. The car would also grab in the right rear wheel but just intermitently. Now 20+ years later I drove the...
  6. D

    Help! Repairing rear trailing arms

    Gary: Could you email me the link for rebuilding the trailing arms. doug_howard52@yahoo.com Thank you
  7. D

    C-3 Carpet Replacement

    Questions about quality of PLUSH! CARPET. I bought my carpet set from Al Knoch at Bloomimgton Gold in June of 2005. I am restoring my 74 vette and thought that the carpet would be of good quality from Al Knoch. As you can see in my picture the sample on the right was from a piece taken off the...
Back
Top Bottom