Welcome to the Corvette Forums at the Corvette Action Center!

Recent content by ernbuild

  1. ernbuild

    sold my 91 ZR1

    Moving on from Corvette's for the moment and have sold my 91 ZR1.Had her for nearly 10 years and have had a great time. Only thing left is the genuine leather bag, Jacket and cap. Just want to know how rare and what would they be worth now?. It is a very limited market here in Australia. To the...
  2. ernbuild

    Help! intermittent no crank at start up

    Well finally got the Z started with the key. For what its worth I ended up pulling the plug on the clutch start switch and connecting the purple wire from it to the powered yellow wire on the starter enable relay. Removed relay altogether. Started up straight away first time. :happyanim:Dont...
  3. ernbuild

    australian 25th annual Corvette Convention

    Hi Guys, thought you might like to have a look at some Downunder Corvettes. We have held our 25th Conention over Easter this year, its is also the 60th year of Corvette. We only had around 110 cars attend, but then there is not a lot of Vettes here anyway so thats not a bad roll up, some even...
  4. ernbuild

    Help! intermittent no crank at start up

    Thaks John, The diagrams are the same as my GM manual for the 91. Its the actual switch I cant find, it just seems to be missing or changed. Dont suppose you know what color the wires are coming out of the switch? Cheers Mate.:beer
  5. ernbuild

    Help! intermittent no crank at start up

    Hi Guys, need help. I have an intermittent no crank at start up. I have a 1991 ZR1. I know about the clutch start switch, but it seems that when it was converted to right hand drive the switch has been changed. I just cannot find the switch as described in the manuals. The car will clutch start...
  6. ernbuild

    Hello from Queensland Australia

    conversions left to right Hi Guys, I've been a member here for years, but haven't been on for a while and yes another Queenslander. We actually have a very active club here. Actually three clubs here. QLD Corvette Club - Home Page Corvettes Down Under Car Club Australian Chevrolet and Corvette...
  7. ernbuild

    C4 The Most Maligned Model?

    Yeh, Me Too I have a 91 ZR1 also and I drive it when ever I get the chance. Its a great motocross car, its under 13 seconds down the quarter mile, and handles every bit as well as any C5. Sure its old technology, but I wouldnt swap it for anything less than a new Grandsport or a ZR1, and over...
  8. ernbuild

    My ZR1 in melbourne at Calder Park raceway

    Hi All ,has been a while since I post anything here, however a mate took this short video at easter this year at our National Convention. The old girl sounds great, shame I really never get to hear it as I'am always inside. I enjoyed it, hope you do. Cheers Ern. :lou‪Ernbuild C4 Corvette ZR1...
  9. ernbuild

    Help! engine not raising idle when turning aircon on

    Thanks Hib, I have the manuals so will give it a go.:beer
  10. ernbuild

    Help! engine not raising idle when turning aircon on

    When I turn on the aircon on my91 zr1 the engine idle is not increasing and if I roll to a stop at lights or such engine will stall. Is there some sort of pressure switch on the coolant line that is supposed to do this? :hb:beer Also can you buy the clutch assembly only for the aircon unit as...
  11. ernbuild

    Question: zr1 less secondary port throttle valves what means?

    Thanks Hib, You have warned me about that before, And it doesnt happen often, just me being slow to change the gears. Not as fast with the reaction time as I used to be. cheers Ern.:beer
  12. ernbuild

    Question: zr1 less secondary port throttle valves what means?

    Thanks guys, I actually wasnt going to remove the butterflies, just prop them open 'so to speak'. I dont want to take them out altogether. I do a bit of drag racing and gymkana events with the car nowand although a bit of extra power may be OK, that wasnt the reason to have them permanently...
  13. ernbuild

    Question: zr1 less secondary port throttle valves what means?

    what will happen if? If you were to remove or have the secondry port butterflies open all the time , what would be the result, and would it do any damage to the engine in any way ? Reason I ask is I replaced the secondry port solenoid only six months ago and has for some reason stopped working...
  14. ernbuild

    Post a Pic of your ZR-1

    updating some new pics :beer
  15. ernbuild

    Post a Pic of your ZR-1

    Certainly is ole mate, couldnt drive it out here if it wasnt.. Real pain in the butt the powers that be out here wont let us leave it LHD until they are 30 years old. Cheers Ernie:beer
Back
Top Bottom