I bought a 2001 recently with 30K on the clock. The previous owner installed a complete Breathless air induction system, BK headers, and the complete corsa exhaust system with the cross over. Since I purchased the car from a dealer, he was not sure if the computer was set up for all of the...
How does the key operate the buzzer. The buzzer always works when the door is open whether the key is in or out. I used to be able to shake the key and it would stop. How do I repair it? Is it normal to stick?
Thanks for your help..
I have attached a picture of the frame. the support to the right on the frame is the one you are talking about. The rubber support sits on top of it.
Why are you only changing the back ones. If the body is saging becareful it could be the frame. I found this out the hard way. That is...
Remove the bolts from the bottom of the frame and pull the cushion and the spacers out. Count the spacers as you will to replace with the same number. There is a nut in side the care that is held in place with a nut holder. spray it it with nut loosener an work the bolt back and forth slowly...
Having trouble with the door latches on a 69. The latches were pulled off by painter and now I'm putting them back on. When ever I tighten the latches to the door, the door locks will freeze in the locked position. If I loosen the screws that hold the latch on the lock the latch will work and...
The new cable should solve your problem. make sure to use very light lubricant on the cable. some use graphite. There could be other problems like a worn plastic gear in the transmision. A worn plastic gear is easy to replace you just need to get the right number of teeth on the gear. To...
My question is on the louvers of a 69 vett. I am looking for someone that has a 69 that has not been repainted. The question is in regard to the nonfuncional louver closest to the doors. What is the color inside the louver? When you look inside you see a some solid looking structure. Is it...
I have a 69. Does anyone know what the correct finish is on the back plastic kick plate covers should be? Glossy, semi-gloss, or a flat finish.
Thanks for your help.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.