Recent content by mikesgarage

Ill go check that out, thank you. I've been looking online for a bit and I couldnt find the right diagram.

I own a 1990 corvette coupe, l98 with the ZF transmission. The A/C has been giving me a problem since I bought the car. I bought the car as a project with some wiring problems. So Im looking for a wiring diagram so I wouldn't die from this heat. If anyone has the diagram I would appreciate the...

I would go with ZF personally. But ill wait till I find someone on this site that has one and needs a gear.. I just rebuilt my 3+4 gears on my ZF S6 40 I paid around $900 for the gear, syncros, slider, gaskets, balls n springs, torque nut, plugs. But watch out most tranny shop dont know how to...

All you really need is the bellhousing, zf transmission with the shifter attached... then u should b all good brother.

Hey brother check to see if u have spark first. Then check for fuel. If it is spark check ur distributor. Or coil to the distributor If its a fuel problem those cross fire injection system had a problem with the fuel regulstors. There should b one on top of the intake anf one under it. The best...

I didn't do much mods to the car. Performance chain, edelbrok intake, 650cfm Holley, no cats dual exhaust with flow master series 50 mufflers, took out the smog pump, HEI distributer. I have the aluminum heads. I don't know my rear gearing yet. Im looking for some real power out of this motor...

Oh I didnt know that was from the sun. Thank you I guess everyone learns something new every day :beer

I only owned mine for a year. Ive been working on them for a few years. My top has spider cracks in the top so ive been safe than sorry. You know how it is brother.

Before I owned a vette I worked on a few of them n never liked how the intake design. I originally bought this car with the carb on it but they chopped the butterfly valve. Idk if the computer works well or why they changed it to a carb? I did some research online and there was a few thread...

That is usually from a 1, 2 slider. What happens is the corners of the teeth become pushed in and rounded and it doesnt go through and let 1st gear ingage. Maybe the shop didnt replace some of the parts you are having problems with? Or like I said before a miss place shim could throw it out. It...

I have a 1990 c4 corvette l98 with a 650cfm Holley. I was wounding what is the best cam for the car

I work on a lot of c4 and I know when you jack any of these cars you must take the glass roof off, pop the hood, and raise the back glass. If not you could crack your beautiful glass top and destroy the rear glass too. Just being a good member brothers :)

Hello I own a 1990 corvette. I bought the car in 2011 and put some work into it. Im looking for the digital speedo cluster. I pulled apart the cluster and took the screen off the ribbon, after that I looked through it with a light. I guess mine is sun burnt how it looks. So if anyone has a...

Hey brother I read your post beautiful car. That whine its usually from a miss placement of a shim. Or a bearing might be bad. Im going to lean towards a miss placement of a shim honestly.