Recent content by SANOLS1

Check the floor for mouse poop. :D

Just a thought, After doing a series of High RPM engine pulls on the dyno, perhaps you have actually fouled the MAF. Easy things first, try cleaning it with MAF cleaner and make sure your new Green Filter is not over oiled. I have yet to have this problem on my Vette but I've had it numerous...

I Love the procharge system. Intercooled ProCharger Systems for C5 Corvettes Coming up on 50K miles with no complaints. You just have to get used to the turbo whistle. (It turns a lot of heads at intersections) It's a lot of work to do yourself but can be done with a little patience. I would...

Keeps us posted!

Sounds to me like Hib is spot on with his suggestions. If you can find a good dyno shop and someone who is skilled with the Diablo Software, they can dial you in for every range of throttle. With the mods you have I would definitely get it on a dyno. A couple of advantages to having the Diablo...

I wouldn't drive it any further than a Dyno to get it tuned first. You will want to remap the fuel ratios across the board. A good tuner is a must. 35K miles on my PC and I Love it! :thumb

I had the same exact problem last year. I believe it was Vettex2 who pointed me in the right direction. All I had to do was pull the boot out of the forward doorjamb to expose the connector for the door electronics. I unplugged it, cleaned it out with a small stiff bristle paint brush and a shot...

Hi Khalilj, First, welcome to the CAC. The short answer to your question is NO. You have 235 40R 18 and 255 35Z 20 installed now. The stock OEM Wheels/Rims are Front: 17 x 8.5 and Rear: 18 x 9.5. The stock Tire sizes are Front: P245/45-17 and Rear P275/40-18. OEM Tires also came with a “ZR”...

I replaced my rotors at 15K miles and installed the BAER Eradispeed two piece Rotors that are drilled and slotted. Once I hit 40K miles on the car (25K since I installed the Baer brakes) I noticed a slight pulse as well. I checked the runout on both front rotors and found they had .0015 and...

+1 :lou

You might consider a dyno run before you start with any mods. It’s always nice to know your baseline so you can realize what improvements you’ve made in a real sense. I agree you probably don’t need a tune for the minor things you’ve mentioned, but as you start playing, eventually you will wind...

Belt Tensioner???

Shooter, That's awsome! Im looking forward to getting there someday. For the last couple of years my wife has been driving mine and I don't get many opportunities. Lately I've been getting up earlier and sneaking off to work in it, leaving her with the truck.:harhar Because it's been so long...

I've only got 32K on the car since new I am at a loss at this point. I wouldn't have expected either of these issues yet.;shrug Hopefully someone will chime in with some info about the rattle. As far as the arm rests, I guess I'll head to an upholstery shop.:W