Recent content by silver00v6camaro

sold sold

how do you like the chambered exhaust and is it from mid america or allens. Im either going to build a 2.5 in mandrel bend system using my dynomax super turbos or go with the chambered system.

Lets see some pics of mandrel bend exhaust. I have decided to build my own mandrel bend exhaust and want to see what some of you have done with the exhaust. I have 75 with a th400 so any help is appriciated. Thanks in advance.

Has anyone ever used the summit h or x pipe on their vette. How did it fit and are an h or x pipe worth it.

Who here has rebuilt their th400. I just bought the Haynes General Motors Automatic Transmission overhaul manual and have read throught it. Is this a difficult task for someone that has never rebuilt a tranny before. I am also going to be purchasing a dvd if i decied to rebuild this tranny. I am...

sorry to hijack the thread but what front spoiler is that on your car chas.

well i emailed them and this is what they sent me. The Engine comes with a chrome oil pan, timing cover, valve covers and polished intake. The stock converter would be fine, but I would base an upgrade on what you plan to use the car for. The dyno sheet is attached. We do have carburetor and...

ok im going crazy depending on what path i should take. As we all know i got the bad end of the deal on my motor build using crap somg heads and rpm cam . Well I was planning on using some vortec heads upgraded for more lift with a comp xe262 cam and an air gap intake. Well I have been...

Need some cam input. 350 Vortec Heads RPM Air Gap Intake 670 Holley Street avenger Carb 9.5 compression which cam to use? Comp xe262 Duration @ 0.050" 218 / 224 Max Lift w/ 1.5RR 462 / .469 Lobe Separation 110 Lobe ID#'s 5442 / 5201 Intake Centerline 106 or Lunati 60102 60102LK 262/268...

http://www.dpmpower.us/parts.htm

yeah thats them they are also automotive application to that is what the head package is under their automotive part of their website.

Has anyone used Derebery Performance they have a vortec head kit that looks pretty good here is the description New Vortec, Hydraulic Roller, Heads, Cam and Intake Kit $1,499.00 New hand worked Vortec Cylinder Heads with swirl polished valves. 2.02” Intake and 1.60” exhaust. This kit comes with...

ok i post a long time ago about this but fiqured since its been a while i would ask. For those who run vortec heads what have you dynoed and what is the setup. So post thoses dyno numbers

I was looking through this engine combo web site that was to me recommend i take a look at. and i ran across this one i would like some feedback on what you guys think of it. It was based on a 350 but i would do this to my 355 also i would chage the cam to the lunati 268 instead of the comp...

anyone every use a wiring kit to rewire your car if so what kit did you go with or what is a good kit to go with. I do not have factory gauges or stero so even if i buy a factory harness i will have to cut it up.