Recent content by tsarbar

I need to know if a jan. 14th 1963 t-10 build date will be kosher with a feb. 18th 1963 (car) build date? Is this too close between dates or would these two dates go togeather? thanks Chris

I'm trying to determine the correct trans for a 2/18/63 build date, 340 horse convertible with a 90XX vin. My only source is noland's guide book, which tells me that no muncie M20's were installed before #14xxx (p190), How can I be sure this car was equipped with a B.W.? Any other opinions...

C1 big blocks have more metal!

My 61 at L.A. county raceway

I'm looking for modified hood for my C1, with a hole already in it, to clear a supercharger.

I am trying to find someone who has replaced their dash but, still has the undamaged passenger side they want to sell.

Tire choice is always subjective. I've been running 205-15 Goodyear A/T's (assurance tread) on my coupe because they are advertised to be quiet and comfortable, plus they don't rub.

John is right...it would be easier to go with an aftermarket camaro setup

I've got C4 brakes on all four wheels of my 61 using the stock spindles and 15 in. Weldwheel rims. To do this takes alot of machine work. I had to fabricate my own caliper mounts to get the rotors and calipers to fit. The parts are reasonably easy to come by, the time and effort are not.

The 5 leaf springs with CalTracks are what I'm using .....It's a little stiffer ride but there is no squatting!!

Can someone tell me the taper angle of a C2 corvette tie rod? I've been told it is 7 degrees...is this true?

Has anyone purchased or installed one of these kits? I'm lookiing for pros and con of this system...mabey even photos? Thanks Chris

Thanks for responding John: My regulators are in good shape with new rollers and plenty of grease. However the motors are used and of questionable condition. I guess what I'm looking for is some kind of load test, i.e. how many amps the motors are supposed to draw when activated, to tell me...

My 61's windows work very sluggishly and i think the motors are the problem. How do i test that the motors are sound?