Search results

Sensei, Anyone used your carb yet????? Waiting for results of your mods. Barry

It may also be your rear spring.I had the same problem a few years ago. Barry

Sensei, Has anyone tested your modified carb yet? Baryy

Gerry, Just curious if it works well. Debating putting in a 383 or a 700r4 in mine. Only have funds for one not both mods so wondering if the stock trans will work with a higher stall converter.How do you like yours? Thanks.... Barry

Anyone install a 2200-2500 stall converter on a th350 transmission in a stock 1981?Comments? Thanks... Barry

Sensei. I am very interested as I will be going to a 383 in a year or so.But timing is everything.I will be looking at a 383 with 400 hp and 450 ft. lbs. torque. Probably afr heads and around 470-480 lift and 224-230 duration.Would like to use the E4ME if possible.Do you really think it could...

Washer tank Vettegal, Welcome to CAC! Washer bottle is a PITA! Did mine on my 81 a few years ago. I believe the charcoal canister must be moved to get at it. I went from under the car and through the fender vent. It takes quite a while to get it out and get another in. Be sure to get a...

Sensei, Since I am getting an itch for my power on my stock 81 I look forward to this simple mod.Also don't be suprised if I start asking a lot of questions about the mods you already have done! Thanks.... Barry :beer

Running 14 degrees as well and it works very well. Curious..... has anyone tried 16-18? Thanks..... Barry

How much? Thanks... Barry

Could be a lot of things.Timing,partially plugged cat,fuel filter,air filter,worn out camshaft,check for trouble codes.The 81 is no big performer from 4000 to 5000 rpm anyhow,power seems to drop off after 3500. Good luck

Moisture Barrier Gentlemen, It's a good idea to place a barrier under the vehicle for winter parking. When it begins to warm up in spring moisture comes up through the concrete in your garage and will accumulate on the underside of the car.Didn't believe it myself until I checked one spring and...

How much for the carb and shipping to R1N 3M1 Manitoba? Thanks... Barry

What is the number on the carb? Barry

Gerry, How's the battle going with the air cleaner? Barry

How is that 700r4 working with the 2.87 gearing Sensei? Barry

Thank you Howie! Nice to see an original sealed e4me still in use. Good luck with the cruisefest preperations! Barry:beer

Can someone post pics of original e4me carb and all vacuum hoses and where they go in their stock and correct locations? Thank you... Barry

Gerry, Glad to hear you are making progress. Where did you get the specs and the tools to set all that up? Waiting for dyno results Barry :beer

I'll be damned! We all missed that on the dyno sheet! Lars is pretty much a god when it comes to tuning! I take it you have checked for vacuum leaks? I believe if your vacuum is too low it can also screw up the mixture as the ecm thinks you are opening the throttle quite a bit even though your...