Search results

My system was right at $2000.00 without the powder coating. the system was complete with injectors, sensors, fuel pump, filter, computer and wiring. Get on the web and look up Affordable Fuel Injection. If you call, talk to Norm and tell him I said hello.

Mine was 1 1/8"

Sorry man, I had to go to location and repair a piece of equipment this morning. I have all except the small plate that goes inside the trailing arm for the bolts on one side and one of the bushing retainers. I'm not sure how I lost that piece, but it's gone. I would think you could get one from...

I'll check tonight and see what all I have. I think I have all except maybe the bolts that hole the bushing reatiners to the frame.:beerArt

I wouldn't count on fuel injection increasing your mileage by much. I have a brand new TPI setup on my 383 and from what I've read they get about the same fuel economy as a well tuned carb. Art It's too bad about your cruise setup. I just removed a perfectly functioning system cause I didn't...

I have the same rear you ordered. It uses the same holes in the trailing arms that the old one used. I have the 1.12" front. I have no idea of the difference in handling because the car wasn't drivable when I bought it. I talked to a lot of people and the survey said with my setup for drivetrain...

I have the stock gymkhana sway bar that came off my car. I'm sure it's all good except for maybe the bushings. If you're interested in it let me know. It's taking up room in my shop. :beerArt I sent you an E-mail with a bunch of pics of what's on my ar now. I think I bought all from Corvette...

I'm at work and the car is at home, but I'll take some when I get home and E-mail you. Are you needing to see how it is set up on the trailing arms or what? Art

I've got a TPI 383 with a 700R-4 and used to have a 3.08 rear. I changed it to a 3.70 cause it was just too tall for me. At 60 MPH the engine was only running 1500 RPM. When I would get into town at about 40 MPH or so it would only be running at about 900 RPM and start bucking. I would have to...

I'm with ya on that one. I'm 6'2" also and even with an auto it's tight under the steering wheel. When I first get in the car I can feel the fuzz on the top of my head touch the headliner, but as I drive longer, the seat compresses a little giving me another inch.:_rock Art

I've got this setup on my 383 and it runs like a scalded a** ape! $2000.00 from First Fuel Injection in Elsie, Michigan.

Not sure if I'll get in trouble for mentioning a vendor here but here goes. Look in Jegs catalog. I bought mine from them. They are made by Stainless Works and are awsome! Mine are 3" so they were a little pricey but the quality is great. Also, the ones from Jegs do not neck down in the...

If your car has anything that can rattle, the sub will find it. I had to stuff insulation behind the boxes for the 8" and also pack some between the sub box and the rear deck.

This was before I finished the interior so there is still some trim missing.

I'll have to take a couple and see if I can post or else Eimail me w/your E-mail address and I'll shoot you a message with pics. Might be easier. My E-mail address is ajett@netzero.com at home and ajett@coiltubingservices.com at work. I'll be at work tomorrow.

Actually, no. There were three holes spaced evenly across the rear plate between the cargo area and the gas tank. I used long SS bolts with fender washers and rubber grommets and drilled holes in the back of the boxes. That's all I have in the boxes for the 8" and they kind of sit on the rear of...

I did something similar to that! In the back I've got an 8" on each side in the top corner for mids and a downward facing 12" sub in the middle. Two 4"x6" in the dash and two 4"x6" in the kick panels for the highs. I've got 1400 wartts of amps and an adjustable crossover in the jack storage box...

I bought the first one I looked at however I know the seller very well and he had 5 other vettes + I was working with him at the time so I knew he was on the up&up. I knew exactly what I was getting.

I bought a set of four at Tractor supply for not much more than that. They are all steel and I can move the car easily by myself.