Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. Rowdy1


    SOLD!!! I bought this kit last week seen here from this seller :1997-2004 C5 BLACKOUT PACKAGE (Complete 9 piece set) FREE SHIPPING! - VETTESHOPE home of the C5 Corvette blackouts and screen kits After removing one tail light lens from the box and looking at it on the car I decided not to use the...
  2. Rowdy1

    Anyone Have Any...........

    Experience with these people or their products? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trkparms=tab%3DWatching&viewitem=&item=300181712207&_trksid=p3907.m32 Any opinions at all I'd appreciate.
  3. Rowdy1

    I Don't Get It

    From the day I bought my 62, I've always felt it sat low in the back. This past year, I actually bottomed out a couple times on a really bad bump so I decided it was time for new rear springs. The ones I took out were 4 leaf, didn't match and in sad shape. I got a NEW set of 5 leaf heavy duty...
  4. Rowdy1

    Turn Signal Short

    The car was rewired two years ago, everything including pigtails. Now when I use the left turn signal, a few blinks and WHAM.......blown breaker, the right side will blink until the bulbs blow. I don't like the "feel" of the signal lever, like it's harder to the left than the right. With...
  5. Rowdy1

    I'm Impressed

    Well I got the 62 back and I couldn't be happier with it. After much research and many phone calls and emails I bought a kit from www.ClassicChevy5Speed.com which includes a TKO 600 Tremec 5 speed transmission machined to fit C1's, crossmember mount, speedo calibrated gear, driveshaft, and a...
  6. Rowdy1


    Someone that knows told me that my 62 was the 3rd to last one built. There were 14K something I think all together ever made. Not that it makes a difference to me, just found it pretty kewl:cool
  7. Rowdy1

    Lots Of Stuff From My 62

    Complete rear with two pumpkins, axles, 3.08 open, 4.10 posi needs pinion shaft with P casting. Master cylinder, wheels cylinders, brakes, drums, bearings, driveshaft, Richmond Gear Super T10 with Hurst Competition Plus Shifter with grip handle. Borg Warner T10 needs rebuild but housing is good...
  8. Rowdy1

    Here I Go AGAIN!!!

    As I'm sure many of you know, I was doing my :lou in the hotel parking lot Friday night and something let go I believe in the NEW Richmond Gear Super T10 trans I have installed after losing the Borg Warner T10 two years ago in Carlisle. I haven't started to take it out yet but I think it's...
  9. Rowdy1

    Dual Master For 62

    Anyone do the disc conversion with a dual master? I have the conversion but I need a DMC before I install it, ideas, vendors or manufacturers appreciated.
  10. Rowdy1

    Anyone See This?

  11. Rowdy1


    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2483856359&sspagename=STRK%3AMEWA%3AIT Frame damage, 350 maybe, worth more than the high bid? Amazing what these cars are going for now.:D ;) ;LOL
  12. Rowdy1

    Aluminum Radiator For Sale

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7908483753&category=33602 This is the one I'm using, it's a direct fit, no BS, it sells for over $500 normally. Just happened to see it, it's not mine, wish I had when I needed mine:(
  13. Rowdy1

    Strange Electrical Problem

    Two years ago this winter, I had a very capable Wyoming Tech grad and close friend completely rewire the 62 with a Painless 18 circuit harness. Everything's been perfect until I finished the trans swap, I lost the dash lights and the rear parking lights. I have blinker and brake lights in the...
  14. Rowdy1

    One Down

    Two to go. I finished the conversion on the Richmond Gear Super T-10 last week but with the weather being what it was, didn't get much of a chance to drive it. This weekend will be different with temps in the high 40's to 50. My next project is to install the roller bearing kingpin setup I...
  15. Rowdy1

    Opinions Please

    About three years ago and 7,000 miles, I put the current engine in my 62, and at that time a bearing and syncro kit in the trans, an original 62 B/W T-10. This past summer, the bearings in the main shaft went. Now mind you, I do not baby the car, I built the engine to run, and run it does, VERY...
  16. Rowdy1

    Question For 81 Owners

    I "think" I remember reading somewhere that all 81's were automatics, true or false? There's an 81 for sale by me 45k, loaded 4 spd. for $9250 or b/o. Make sense or misprint?
  17. Rowdy1

    Anyone Know....

    What the torque spec is for the flywheel to crank bolts?
  18. Rowdy1

    Shifter Removal

    Anyone know if I have to pull the trans to change a Hurst shifter on a 62?
  19. Rowdy1

    Size Difference

    Got a call today from a friend putting a 62 together he bought with no engine or trans. He bought a super T 10 transmission and says that now after installing the engine and trans, his crossmember is off at least two inches for the trans. Anyone know why there would be such a difference? Is it...
  20. Rowdy1

    Not A Corvette But.....

    I just got this Friday. I know it's not a Corvette but it is SWEET! It's a Danbury Mint 1/16 55 Chevy Pro Street with awesome detail and a hand waxed superb paint job. Now if only i could learn how to use my camera:(
Top Bottom