Search results

Check the contacts where the pellet on the key fit in the ignition switch, sometimes they cause vats problems. Are you getting voltage at the starter? One other thing I can think of right now would be the neutral switch, but that only applies to auto's. :w

Excellent work Shuweeet!!!:_rock I just found this post. I must say very good job. Your upholsterer (sp?) does great work ... you can tell by the quality stitch work. The first pics reminded me of my old car. I had just installed the cheap sound deadener with a new system ... Sony head...

Easy way :lol Hold 1st gear till the light goes out ... near 3K RPM on my CE LT4 .... they like to spin up a bit.;) If you are under the car you can unplug the connector ... drivers side, mid-car, near the shifter boot. Most of the plugs are just to keep debris out of the connectors ...

Very nice there stgry1 :upthumbs Hard to say with the white body, all black would look good also. :w

I'm with TLong ... sounds like a diff problem. Could be the bearings on the left side yoke output. I had a similar sound but very faint and only at part throttle. Tore the diff out and took it to the shop for a rebuild. The guy at the shop said he didn't find anything out of place or worn...

Here are a few pics of my wheels. Whole car. Rear wheel close-up. Depending on the angle and the lighting sometimes the wheels look more black ... other times they look more chrome. :w

I've got black chrome GS replicas on my CE. 9.5's on the front and 11's on the rear. They came with polished aluminum center caps and chrome lug nuts. At first I didn't think the chrome/polished cap would look very good but after I received them I think they look pretty good. The black...

Yes, I've done it. Yes, you will gain some HP, not so much more lope, maybe a little. With the larger ratio you gain a little lift from the cam. Considering that every little bit adds up to more HP with these cars, I would consider it worth the effort, especially if you are planning on doing...

I've heard that the Superram has fitment issues in the Corvette. The height of the plenum causes interference with the hood. I've also heard (maybe from Moonunit) that the SR plenum is a real pain to assemble without vaccuum leaks. I may be mistaken but I believe the SR and I know the...

The '90 doesn't have the little doors. You have to reach between the frame rail and front bumper from the inside of the engine compartment. They are 1/4 turn and pull out. Tough to see because of the radiator hsg / air intake. Easiest to remove the air cleaner assy. :w

Craig, Thanks for the kind words, and the offer, but I think my GF is gonna keep good care of it.:upthumbs When I didn't see you post I figured you were out of town or something. Yes Im going out to sea ... leave in the morning ... gonna be gone for some time. Get back just in time for...

:rotfl :rotfl :rotfl :lou :beer

Thanks guys I'm loving every minute of it. I went today and paid the taxes and applied for my tags for the new machine. My first choice was available so I got it, hows this for a tag .... Z15 .... I think its pretty good. It would take a Corvette enthusiast to realize the meaning. Patrick...

Anthony, Jeff, Daryll, Billy, and Pete Thanks for your support and well wishes. Yes Bubba Claus was pretty good to me. I've gotta say thanks to my GF Toni for taking me over to pick up the car. We had a pretty nice ride back playing switch the lead. This car only has 51000 miles so I...

Thanks Mike. Its been a learning experience to say the least. :w G

Thanks Jane Ann ... been smiling every mile. :D :w G

Thanks Dwayne You know the feeling :_rock :w G

Thanks Rowdy Guess I gotta figure out how to disable that ASR before we get to BG. Makes it tough to do a proper burn out. :) :lou Winter storage .... man that sux. I'd have to move. :L :w G

:D and Motivate it does :D

Thanks Bob its good to be back. :w G