Search results

Stephen, I will try to dig something up for you, but I don't know how to post it here, soooo if anyone could help with this we can get it posted, if not, I can E-mail something to ya. I'll look after supper. Mine has plastic looms that keep the wires neatly seated together, and has sleel...

Bobchad, what did Flowmaster say to make you chose 2 1/4 pipes with the stock ram horns?

Weird this came up on this thread... I just went to Hbg. last Fri. and got my classic tags, for this excact reason. They cost 100.00, needed 4 pictures, and that was all they told me, the process took longer to park than it did to get the tag! Another note on sniffer test in Pa. I read the...

Do they use the same hangers? I do have a set of Targa pipes to put on them, I do have them on the car now, and love the sound. With the true duels it would be even better. Dave it would be great to take a peek at your exhaust Ron millagauss@cs.com

I just replaced my plug wires with stock Delco replacements, they go thru the shielding fine if you do them from under the car, very easy. I ordered them from one of the larger vendors at the spring Carlisle show, they had 10% off and free shipping Ron

Has anyone tried the duels bent just for the 80 - 82's from Mid America? I was going to replace the crossmember to a 79 with the holes for the exhaust, but these look very nice... I would love to know how they fit part # 603-862 for 80-81's part # 630-866 for 82's you can look at them...

I had the same problem with fuses on this circiut, finally traced it to the courtesy light under the license plate light, by the spare tire. The socket was bad shorting the fuse. It was really hard to find because someone had swithced the license plate socket to the courtesy light, and courtesy...

I have an 80, #2327, the intake is aluminium, and painted blue Ron

The Visor elbow has broke off in my 80, I pulled the cap off, but does anyone know how to get the shaft out? Look like some kind of spring clip, but I can't seem to get it to pop off the shaft.... any tricks? Ron:(

I had good luck with a form of an "easyout" just make sure you have the right size for the hole. Or get one that has the easyout bit and drillbit, I have found you only have one or two good shots at breaking them loose before the hole gets reamed out, spray them, lightly tap the easyout in the...

Your RPM will NOT clear the hood on an 80, been there done that! Seems I spent one Sat morning just replacing my gaskets:(

My fan on the heat has always worked all but the very highest position, never thought much about it till I tried to fix it! I bought a new switch at the car show, replaced it, and still the same problem, no high speed on the fan.... What gives? Anyone run into this before, is there a relay or...

900.00 seems a bit much to me, Jeg's Performance sells street strip transmissions for 599.99 for cars up to 400 hp. TCI also in the same book has there Street Fighter tranny for up to 450 hp motors for 719.99, you might want to check them out. Ron

MidShark, thanks for the help, where could I find tranny numbers, or any refrences online to identify it?

Pace78, watch the heat on the rear bumper, I have the same pipes on my 80 when I bought it, on long trips (1 hour or more) the paint started to yellow from the tips being to close to the bumper, I had to lower them Ron

I need some help with some numbers for a 79 Vette, the stamp pad on the motor is VO703ZAH, and the block casting in the rear is 14016379, I found the block casting number in a book, but not the stamp pad number. The transmission number is 16D530187, auto 350, is this the original tranny for a...

My father in law passed away and left it to my wife, we didn't change the title over yet, or figure out just what to do with it. I think he paid 5000.00 for it in 2000, I would of never paid that much for it, but I don't really know what they are worth. I bought my 80 for 8500.00, it wasn't...

I just aquired a 79 L48, it has been painted purple, interior isn't in good shape, and needs alot of work. On the plus side, the motor is strong, new tranny, carb and intake (Edelbrock) accell distributor, headers, dual cat exhaust like new, and everything is tight and strong. My question is how...

Not sure on the color, but you better get a high temp powder or it will become flat black in no time. Ron

I would get someones rims and tires and put them one your car for a test drive, though not a Vette, but my GMC Yukon just cost me 3000.00 replacing everything under the sun, and it turned out to be a broken band in the tire. The tires where less than 6 months old, and balanced, but when they...