Search results

Brakes C4 The calipers never been removed and are factory installed. I ordered two pins and C clips as i have new brake pads in the garage waiting for winter to com. My winter project is new Bilstein shocks round bout, new brake pads round bout, stainless steel brake hoses and a new 2 din...

Answered by mail :-)

Tech 1 A It is a diagnostic tool which corvette garages used for reading codes and reprogramming of the corvette´s different systems. Steve

Do these calipers suppose to be loos (ish) I have a clicking sound everytime i press the brake pedal and can see that the calipers mooves slightly :ugh

Heat shields sounds likely. Cant get properly under the car but go to a garage on tuesday for MOT and will check at the same time.

Thanks. I will replace mine with MSD :-) Still have the original and the water pump works fine but have ordered new MSD spark wires and thinking of replacing the coil and the optispark with MSD and when first doing the fiddle replace the waterpump in the same go (might go for a electric pump...

I am thinking to buy this myself. Are you happy with it and did you install it yourself? Regards, Steve

Tried that, sounds like it coming from all four corners and that it is some kind of related to the brakes ;help Know that the ABS can rattle but this is a bit loud i think.

Rattle Nothing from the cat :)

Car with shocks are 50K and with Bilstein original

Hi folks. Have a rattling sound which can be related to the suspension as it occurs when driving uneaven surfaces. Cant find anything loose and bushings look fine:eyerole Thanks

Hi. Anyone with MSD 6AL and MSD GM Coil mounted in the engine bay. Will i need to replace the OPTI to MSD or will this setup work on my original OPTI, only 50K over 16 years. Anyone with a picture of where they put the 6AL in the bay? Is there any problems with this setup or is it a waste of...

Why not by a convertible with a hard top. Best of both worlds. C4 did not do automatic tops. You have to get out of the car and work :-) Regards, Steve

Rims C4 17*8,5 offset 56mm 17*9,5 offset 53mm 18*9,5 offset 58mm och 50mm 18*10,5 offset 58mm, 56mm och 36mm Corvette 88-96:17*8,5 offset 56mm fits front and rear. 17*9,5 offset 53mm fits front and rear. 18*9,5 offset 58mm fits front and rear. 18*10,5 offset 58mm fits rear. 18*10,5 offset...

Hello. Is it common that the pke module fails or is it operator fault always. I just finishing up a 1993 and i ask as it is easier to replace this now than later. If i go for a after marked system do i have to any other modifications than disconnect the PKE and will this make the ECM confused...

Bilstein cost a arm and a legg in Norway and if i buy from Sweeden i still have to pay 25% VAT on top so the best is to buy from the United States as i do with all the parts i need. Even with $200 freight and VAT i save quite a bit. I am buying a set to my Tahoe in the same go so there is a...

Hi there :) Stupid question but can anyone tell me the weight of a shock absorber or a set of 4? This is a issue as i pay pr Lb in freight and some times it is cheaper to buy stuff closer to Norway if things are heavy, All the best

My shocks are rock hard but cant see any leaks. The car has been garaged for some few years and resting on the suspension, not on the body. Thats why i want to replace them. I like to know that everything is in good condition on my car and replaced a lot since i brought it two years ago:)

My driving is mostly cross country and i never used the car on track. With this i guess a shock from others than bilstein will do me best? I have bilstein on at the moment and they are close to 50K miles so i want to replace them. Steve

Sorry, i did not look at the year;shrug