Computer Controlled Carb/Distributor Deletion?
Hi people...on my 81 am I able to install a 'older' pre-computer controlled Quadrajet and a standard vacuum advance GM HEI dizzy and have a great running engine?
If so would I just ignore the computer plugs going to the dizy/carb and tape them up...
Yea, I'm still in the same situation...just no time to solve this one.
However I did notice every now and then I'll be driving down the road and my seatbelt warning alarm will go off. :eyerole
Just where is that "timer" for the inside lights???
Thanks for the above info...I know it ain't fixed and the battery float/tender is only holding it a 12.52v after 2 days of sitting. I'm trying not to hurt this "new" battery.
It should hold 12.62 to 12.72 to keep it healthy.
I'll try to diagnose it a little more with your suggestions. I have a...
Fixed it...hooked up a battery-tender :L
It holds it at 12.72v :thumb
I can easily tear into a V-8 and make it right but damn I HATE electrical issues :hb
From what a mechanic/corvette specialist friend told me, on (my) 81 the computer stays live for a few moments after the engine is shut off...then goes into idle mode, no draw from the battery.
Not sure if that's my problem yet...for me electrical issues is a real PITA. :bash
Second alternator's in...something tells me I have a draw from somewhere else > maybe the computer isn't going into idle mode after the car is shut off ;shrug
Hi Tim, after some disbelief the current rebuilt alt could be doing the same thing I did go through the same test again. Sure enough with alt + hooked up and the +battery wire is removed then touched to the battery it tosses a small spark...unhook the alternator and no spark at the battery.
I...
Hi people, been a while since I've visited.
Besides the regulator/reluctor sticking in the alternator, is there anything else that will drain my battery down in my 81 Vette?
I know the radio has a memory and the car's computer (may) draw something but, if I'm NOT seeing any lights on etc when...
"There is no such thing as a lubricant which will cure a "clunk" coming from your rear axle."
...Then why does it not clunk when I change out the oil and refill with clean oil w/addative?
"In fact, there's a chance that the "clunk" may not be related to the rear end at all. "
...for sure it's...
A knowledgeable friend suggested I try the above gear lube in my 81. It's always had the clunking sound when coming to a stop. He said "it will cure the clunk" When I change out the fluid and add two bottles of the GM additive it goes away for a time but always returns.
Soooo any feedback about...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.