Search results

I checked the switch one more time and there is indeed three speeds operating. However, oddly when the switch is pushed to the right this is the off position and is contrary to what the face plate says on it. Anybody know why its reverse?

Heater Fan Switch On a C3, the heater switch has four positions: Off, Low, Medium and High. The High position on mine is Off. Is this normal? I was thinking that the High position on the blower is not working. Is there something wrong with the blower? Can anybody advise me what is correct?

Yes, I didn't need to buy anything except the pipes and hangers.

I didn't just throw it away. It's in a box stored somewhere safe. In the mean time: roar!

No its right, the old switch did the same thing.

I purchased a set of pipes from Corvette Central. They were sold as an "off road" system to get around any Federal emission restrictions. I didn't need to do much to install the pipes on the car - just floor jacks, a socket set and a few hours of time. The pipes fit perfectly.

The AC switch I have has an off position to the extreme right when you face the console sitting in the driver's seat. Is this correct or, am I missing a high speed position on my fan switch?

:L Hello friends, if you track my threads from several months ago I discussed taking off the my smog pump and replacing the Cat with 2 1/4" dual exhaust just like the good ole days. Here it is nearly a year later and I can say that my car is running great and the Magnaflows running out of the...

Does anybody know where you can get a roof pannel carrier that mounts on the luggage rack for cheap?

We all are familiar with the small adjustment screw on the steering box that is for the play in the box. Does someone know the proper way to adjust this screw? Thanks, Ken

Okay, my windows are finally fixed. I'm embarassed to say, that the problem after tearing apart the interior and tracing the problem; I found that the ING wire was pulled out of the fuse box. I plugged it back in and voila my windows work again. For the record, if any of you have a problem...

I don't see it on the 1975 - could it have been eliminated.

Oh, I see - is it the same for a 1975? If you are going to test the circuit breaker is it not wise to connect the wires together to see if the windows will work, or better, run a continuity test from each side of the terminal to see if the breaker is okay?

Does anybody have a picture or better decription of where the circuit breaker exactly is?

Wow, you're a life saver. I'll check it out ASAP. Thanks much

Electric Windows Not Working Hi, I recently repaired my Tach with a new circuit board and now my electirc windows don't work. I took the console apart and everything looked okay. I don't have a fuse in the fuse box for the windows so I suspect that my C3 uses an inline fuse. What I think is...

top tear down to replace cam and timing chain - thanks Ken

Probably the worse job anyone will ever have to do on a C3.

No, not yet. I want to take down the top end of the motor first and install a new cam (winter project) and do the header's after that (maybe this summer). My situation for installing the new exhaust system was an unexpected expense due to the fact that the 33 yr old pipes literaly fell off the car.

Up Date The two inch dual exhaust were installed on my 75 and I have noticed a considerable increase in power. The sound resonates very nicely. This was certainly a good move. The job included removing the air pump and putting it in storage, taking about two hours to install the pipes -...