Search results

got pic please check my profile name and goto my homepage, i have a pic of the rear end mount, you'll se what broke and if anyone has got this bar off let me know, how to do so, you'll see in the pic there is one bolt remaining in the arm, i cant get it to budge, ( i can get the nut off) i am...

try again hope this works

hope this works

repair tomorrow i plan on possible welding in some thicker steel, there 2 bolts that go through this arm with the bushing that acually go through the rear end, i took the nuts off, but cant get the bolts to turn out, if they just slide through is there a safe method to hammer them out, i...

rear i'll do that tomorrow i just put the car in the garage, how do i post pics, i just noticed as well that my tires are rubbing up against the emergency brake cables, but i think the reason is that the rear tires sit at an angle (outwards) there 275's

i dont know what this part is called, but there is a arm that bolts to the rear end, one end attahes to a part welded to the frame and there is a bushing attached to it, well i just drove it and heard a noise that sounded like the driveshaft was hitting something, i was going very slow, i drove...

411 thanks looking forward to seing it, did you take pictures of the installation?

parts price could you give us a price list of parts numbers, sure would love to do this.... thanks

i have a 74 4-speed it says hurst on the shifter, when i put it into 1st gear i have to push real hard where it hits my shifter plate and acuallaly i need to push hard enough so my console moves a bit, it always hit but now it finaly got worse, can i adjust the linkage under the car to fix...

clocks working after 14 years just cleaned my contacts very lightly with my dremel, then sprayed the parts with wd-40 then used a blow gun light pressure waited 15 minutes did again, wired up clock to battery and then did once again with wd-40 it's been working fine for 2 days now, it"s nice to...

contacts i took my clock out the other day, i am going to clean it, and see if it will work, but i noticed that the arm that stays stationary, it's contact is worn in a way that it looks cratered, could i still try to clean the contacts with a light file, or is there some type of material i...

i cant seem to find the site on here, that tells you the corvettes history, how many where made ect, could someone post the link

roller rockers i have a hydraulic cam, one side does seem to be a bit louder, so i'll check that, should they still make the ticking noice with these cams

i can hear ticking from the rockers when i open the hood, not real loud but you can hear it, is this normal

msd bracket thanks, it is riveted to the fender, i used rivits becauce they would sit nearly flush, so there would be no interferece with the hood closing, plus there hardly noticibly, i bent the aluminum to conform with the fender..

just wanted to know if i could use a tow dolly for an 80 mile trip, it has a 4 speed, has anyone used a tow dolly for there vette

engine bay thank you.....

Hooker Exhaust i have Hooker headers with 2-1/4 inch mandrel bent pipes with a crossover pipe and Hooker super comp mufflers, it sounds awsome. it reminds me of how the 60's muscle cars... i didn't go with flow masters because they reminded me of the days when every mustang owner had...

side skirts i wanted to add side pipes, i think they would look awsome using the skirts i have, i would have to cut an outlet for the exhaust tip

very nice i like it a lot, i almost did that to mine.. 2 things stopped me, 1 i didn't have a garage or anywhere to do it at the time, 2 (most important) i didn't want to loose the hide away lights.... but it does looks good...