Search results

Battery corrosion ? Not too sure what your asking, If it were me I'd go with Arm&hammer Baking Soda & lots of water and then flush the area once you've removed the part/s that are soaked with the sulfuric acid, and once clean and dry I'd paint anywhere the battery acid was with something like...

I'm looking for the leather covered emergency brake handle. It's held in place by one #6 hex head screw. I want to refinish it. Thank you ! :w Jim Ward

TBI shot I had to contend with this awhile back. Your Throttle bodies are shot. The gasoline is at 18PSI I believe at the fuel regulator and should come out of the Two Injector in a conical spray I believe. If they are just dripping it defeats the whole purpose of spreading the fuel equally...

'Thunk Noise' OK, this is my opinion only, but "IF" you get the 'thunk' immediately upon lifting your foot off the gas pedal, I would have to do the simplest thing first, so I'd flush and change the 'Differential' fluid, if that fails, then I'd put the car in gear only and put it on a lift and...

Suspension ? Wow, I never knew that there are five configurations of the F55 magnetic ride packages in options. 2013 id going to be a wild year for Corvettes. Great ! There is now so many different versions of Corvettes over the years and the different Big Named shops doing work on Corvette...

Venom ? I never heard of it either, but if it's for a Corvette it's, Overpriced, Over-rated and poorly constructed with minimum instruction or no instructions. Either way . . . . . . :lou

Thoughts in the back of our minds. . . First off I'd NEVER sell my 2003 50th. Anniversary coupe. Nothing, save for a 2013 60th. Anniversary convertible has any draw for me. Now as to buying a 2013, I'd like to, but the garages are all rented out except for my one for the 50th. and I'm not...

Battery float charger. I'll chime in, I have a 03 and it has a optima Red Top in it. And I bought a float charger from Restoration Battery, I think it called battery-minder or something. But it is a float charger and it's a great one. If your battery charge drops below 11 Volts, it starts...

New Fans ! Ok, Thank you guys. :w

Cooling fans ! Dear Gentlemen, Please accept my apology, I don't have a overheating problem in the slightest way, I was just wondering if and when I were to look into a new set of engine cooling fans, what is out there as a replacement ?. I tend to be very ANAL at time when I am looking at a...

I'm looking to install more powerful fans in my 2003 Corvette. What size are the stock fans, 11" 12" or 10 inch and I see a lot of different fans out there, How do I find a set or a single fan, and or a complete fan/housing combination ? . . . Ideas ? Thank you ! :w

50th Anniversary cars All 2003 Corvettes are considered Anniversary cars, but only the 1SC cars had the 50th. Anniversary packaged cars, special paint and different interior like special headrests and the wheel are painted in a 'Champagne' Color & a few different things. I just pulled the...

2003 interior armrests removal . I don't think so, I have it since new and they were on it when I purchased it. They look stock same color and cut to fit the door panel. and you can see they are the same color of the door panel ? The alcohol and water well prep the door panel clean enough ? I...

Cleaning up after Goo Gone ? Hay Junkman, Once I have the old armrests off, How do I clean the 'Goo gone' Up so I can reattach the new Armrests with fresh 3M automotive double face tape ? The bottle of Goo Gone only speaks of removing any kind of stain and not about...

Goo Gone ! Thanks Junkman, I go to Home depot shortly. And apply it to the one door panel side and let it soak in ? Thank you again !

Factory installed armrests Yeah Junkman, They came with the car and I believe they are held on with two faced tape, I think. their on a standard C5 door panel. I can lift them a little but I don't want to break anything ? :confused

I bought a new set of armrests from Corvette America and I need to remove the old gray armrests first ? How do I go about this ? Fishing line underneath and work it back and forth or what ? Thank you ! :ugh

Apsis splash guards installed ! I bought a new set of the Apsis splash guards, they aren't cheap, but they are a good buy if your going to keep your Corvette. I have a 2003 50th. Anniversary Coupe and I had them painted the same color "Anniversary red" Once they had dried for a week the owner...

I replaced the stock rotors on my 2003 50th. Anniversary coupe and now I'm I'm looking to sell the old rotors. Somebody can use them. Perfect condition.

It was borke and it needs a fix now ! I have not liked the design from the get go, it is a very tight fit in the cabin even for someone my small stature. A new, well not a whole "new" redesign, but a set of small changes would do a great thing in refreshing the face and rear and perhaps a...