Search results

I believe it is controlled by the headlamp module.

The bottom seat frames tend to crack in that area. You will have to remove the seat flip it over and see if the frame is cracked. You will need to remove the seat cover and cushion. It can be welded back together. They sell a renforcement plate to keep them form cracking.

You said you had fuel coming out the line "gummy" well am guessing the fuel has loosened it up and created a blockage. If you disconnect the line for the tank to pump fuel should be comming out. It will take awhile for this gummed up fuel line to clear up.That fue that turned is nasty. So stock...

Two studs from the gauge bezel go through this metal reinforcement and is secured with two nuts. I would find another one it is available. The console will crack eventually. And the bezel will be secure.

If the park brake hardware is original it is most likely rusted solid. You might try to remove the rotors and see if you can free it up. You may find that the hardware should be replaced. You can get new hardware the is made of stainless steel. You should back off on the center cable. Adjust the...

Just my thought..... You my get more.... with exposure.

It would be nice for us 73 guys to view the data base

Have you checked the speedo gear in the trans? 1 bolt and the housing will pull out. Look at the teeth they maybe chewed up.

Why would you want to remove the A/C? I think come summer time you will regret it. These are very hot and uncomfortable cars to drive in the warmer weather.

Something is wrong should be a 19 gal. tank.

Thats a tough question. Finding a good 73/74 with no previous damage would be a stroke of luck. Also depending on the condition would be another factor. Try contemporay corvettes Bristo PAl

First thing chop the tree down. I would say at least 800.00 depending where you live

You can try it. But I used the correct rivets.

Just my op. I would not use the pop rivets. The originals were aluminun that have a 1/2 in head 3/16 th dia. And you peen them over with a punch and hammer. The reason is with the pop rivets you may have clearence issues when you close the doors. The mandrel sticks out and will prevent the door...

I have only seen 1 camshaft broken in half. But it was due to the car hit dead center around a tree.

You are right the small line is the return. If you still have the quadrajet check the fuel filter in the carb. And it could be the accelerator pump is on it's way out.

AL smallblock AT HD 427

You say 6 pints? Should be close to 5 quarts

If it is side to side loose, you can adjust the bushing stops they also center the door to the opening

In motion I would say it's the speedo