Search results

Thanks. Appreciate the info and will use the Dremel tool. Look forward to your updates on your web site. On the sound deadening, did you go the Frost King route?

Hi CSDMagRed01- Thanks for the tip. Question for you - I have Z06 screens to install but want to make them functional. Any tips on cutting the solid plastic fog light shrouds? What did you use to cut them? Did you leave them on the car? Did you remove the plastic pan under the car so that...

Could be w/re to hairspray - never thought about the residue issue. My concern was using a petroleum product on rubber items - largely from cautions found with "O" ring seals. It may be an unfounded concern in this case. A friend suggested using a very thin film of waterless hand cleaner as...

I kneeled in front of the car and fed the air box into position with my hands in between the hood and the bumper. Once the lid was in place, I slid the grommets over the studs as far as they could go. Then I worked my hands down as close to the studs as I could. Once in position, I pulled...

I didn't. I just took the air filter out.

Better check it out first. I have heard that the manifold swap only helps 97-00 as Chevy changed the manifolds in '01 so that there was no difference between the LS-1 and LS-6 intake. Check out a couple of on-line catalogs (West Coast, Ecklers etc). They all sell an LS-6 manifold but I...

Just put a Z06 airbox on this weekend. Agree w/Yellow 2002 and RC 135. I used masking tape on front of hood and bumper. Definitely done from the front of the car. Placed a cloth between bumper and support and, carefully using a long screw driver pried the stock airbox off of the studs...

If you are talking about the pipes that go over the axles and the mufflers and tailpipes, its a direct swap out. Takes about 1 hour, provided that you can get the car up over 30" or so in the air. Its only 4 bolts and 2 hangers. Only prob is the passenger side gas tank shield - you may have...

Tripleblack51 et al - no offense taken. I was coming from my perspective on the few improvements Chevy seemed to have made going from 00 to 01, but not as an owner of an 01 (talked myself into an 04). At the time, I was torn between a 99-00 on the basis of price and an 01. The great part...

Spent alot of time researching different years. My suggestion is to find a clean, relatively low mileage, and unmodified 2001. There were a number of improvements over the years that all come seem to have come together in 2001 including a little more horsepower. Agree with atmmac, mileage is...

QVC has a 2004 CE Z06. Also, BJs wholesale club sells Maisto 1/18 scale metal cars. I have seen Z06's in yellow, red, black and blue there. They sell them for less than $10.00

That would be great. I can take a scan or a fax. I think the fax would be long distance. CAn you scan to an Adobe Acrobat file? My email is 1bigdog17@comcast.net

Anybody know where I can get some DIY instructions on C% glass top adjustments? Thanks