Search results

When you carry out the bleeding are the back ones more difficult than the front? If so, bleed both halves of each caliber at the same time . Good luck. I have never heard of that. How is this done? Do you run 2 separate bleeder hoses? Please explain.

Rotor Runout Rotor runout is another cause for air being sucked into the calipers. I believe runout should not be more that .005".

They do sit higher than stock seats. Taller people with t-tops on may have a problem. I almost never have my top up.

C6 Seats They take some work to get them in the right position. I have the lumbar, booster, and heated seats working. Seat belts are seat mounted and stock mount on the retractor side. Planet Seatbelt made them for me. Good luck.

I agree.

Craft shops also might carry these items.

Depending on what you buy. Wheels around $1,000.00 tires around $1,000.00 to $1,500.00. I suggest that that you try playing around with the tire pressure first. I would under inflate rather that over inflate. But, why not try both. I usually under inflate when we make canyon runs. I...

And have patience putting the clip back on. You will need it. it is a bear. Unless someone has a great trick they would like to share.

You have to pull the console sides off. The center console rear screws need to be removed. Then it pulls off with some gentle prodding by lifting the sides down and outward. You need the interior dye promoter, adhesive spray to help with adhesion and the vinyl paint to ensure no flaking. I...

There are interior paints and dyes that hopefully cover up the stain. Here is a link to Eckler's. http://www.ecklerscorvette.com/catalogsearch/result/?q=Paint+interior&x=0&y=0 There are products to prep the material to be painter and I believe something that aids in painting vinyl materials...

A friend of mine found this car online for me. The MacMulkin guys inspired my order of a 2017 Grand Sport Convertible, Color Black Rose, Interior Gray, Black Top. Saw it on line. I talked to them and was impressed. In the final decision I decided to order and get it delivered it here Southern...

I like using Hubcentric wheel spacers especially on the front wheels. Have a look at these. You might need Hubcentric rings between the spacer and your wheels to keeping everything concentric. 1 5" Hubcentric Wheel Spacers 5x4 75 7 16" Studs for Older Chevy Buick | eBay

OK, I am confused, yes conventional coolants raise the boiling point compared to water, but I thought that plain water coolers better or efficient than a 50/50 mixture of conventional coolants. Yes, they are apples and oranges. But, if water cools better than the 50/50 mixture of conventional...

Have any of you ever heard or used HyperKuh with an aluminum radiator? If not do you have an opinion? Were I live we do not need Antifreeze, but I want to protect my radiator corrosion. HyperKuhl SuperCoolant

It is like driving a different car. Isn't it???

Oh stop smiling. You are going to love it.

Door key.... Oval key.

When you shorted the system you probably caused another wire to melt and that is most likely cause of your new short. I would also pull the starter and bench test it to see if it is still working. You will either have to visually check each wire and/or test each of the wires point to point...

Weight I have a friend who is all about weight reduction. Unstrung weight. Drives a Lotus 7 with a Cosworth engine(250 HP). It started out at 1200 pounds and has it down to 980 pounds. He weights 120 pounds and recently bought a magnesium bell housing to save 5 pounds and a titanium...

I agree. Bagging and taking digital picture are so helpful.