Search results

The piece of foam is the horse collar insulation that goes on top the bell housing (between bell and trans tunnel).

Pretty much bolt on, at least on a 78'. At most you'll have to drill a couple of holes. Here's the rear.

You need to go to this web site which is the branch of Letric Limited that sells the connector parts. http://www.wiringharnessparts.com/main_page.html If they can't help you, I might have a used one from my 78'. I saved most every connector from the old harness.

A heat gun is your friend when it comes to carpet install.

Do you need the bolts for the wiper door? If so, looks like ZIP has most of those.

Actually, you will need to loosen the nut to lower the rear. They also sell longer bolts if you want to get it really low. Here's a good link I saved on the subject. http://forums.corvetteforum.com/showthread.php?t=1927664&highlight=ride+height

If you can't find what you need on line, post the part numbers and I'll look them up in the catalog.

This place has lots of OEM fasteners and cross reference the OE part number. (some of them anyway. I have their catalog and it is an inch thick. http://www.amkproducts.com/ 120622 is an 8-32 (11/32 across flats) .12 tk nut. Couldn't find the other one.

Yep, U-joints.

I bought mine from Harbor Freight. They have a store nearby so no shipping. It was the best price I could find. I think they are all made in China these days. I've had mine for 4 years and pulled many motors with it including a couple of BB...

I have a 71' and a 78' in the same garage both with Quadrajets and I don't get a gasoline smell. If the charcoal canister and its associated hoses are correct and functional, you should not get a gas smell.

It's a crate engine built by GM. You can't go wrong with it. Shop around to get the best price as all GM dealers sell them. $5945 at Pace and free shipping. http://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=73193

Here's my 71'. As stated, it's on the stamp pad at the right front corner of the block.

AIM and GM shop manual.

There are 3 studs cast into the cap (#1 in the pic below) that get peened over to hold the emblem in. Not sure if you can actually change it. I just bought another cap.

I used a Flex-A-Lite duel electric on my 78'. Works great and fit well. Comes with a universal fit bracket, but I fabbed up my own. You should also consider the stock GM fan and clutch. They are very quiet as well. This is the one I have...

This is for my 71', but yours should be mostly the same.

http://forums.corvetteforum.com/showthread.php?t=1590262

You will find it here. http://jimshea.corvettefaq.com/?page_id=4

No, it's a scan from the magazine. PM me your email address and I'll scan the rest for you as I don't want to post it.