Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. pkincy

    Ramps? Rhino?

    I had a set when they came out and simply gave up on them. The sliding is a problem and frankly once the car is up they get hugely in the way when you are trying to do some work under the car.....(why else would you have it on ramps). Get a good aluminum floor jack and a set of regular and a...
  2. pkincy

    Help! Engine runs till warm up then dies won't restart till it cools down

    It seems foolish to simply throw parts at the car. You need a good diagnostic tool. Either borrow or rent an AutoXray or buy a cable and TTS Datamaster and do a full log of what's happening and post a link to it and we can help. I have a suspicion it is dying when it goes from open loop to...
  3. pkincy

    Fuel Injectors

    And the Ford injectors are normally rated at less than 3 bar. I don't have the individual rating specs in this computer but Ford tends to run their older fuel rails at 33-39 psi. Hence a 19 lb/hr Ford rated injector will flow more than 19 lb/hr in our 3 bar fuel rails. Who knows it may even...
  4. pkincy

    Intake Manifold Oil Leak / Vacume Leak

    You need to check those codes in the Helms for your car. I am going to guess that all of your sensors are not toast. It more likely is a common short in the wire harness providing voltage to the Oxygen Sensors to get that many failures. But you need to methodically run those codes and their...
  5. pkincy

    ECM location

    Yup, right above the battery.
  6. pkincy

    Cams ??

    Sounds like you or your buddies have F or Y bodies with the LSx engine. No you can't use the same cam and in fact the heads and intake you have flow very differently so you want to think about going in a very different direction. Try TPIS website. They have specialized in the L98 for years...
  7. pkincy

    17 X 11 Rears for 90 - Tire Advice

    The GS Offsets will stick out slightly hence the flares as someone has already posted. Although not an inexpensive solution Fikse makes 17x11s that have enough backspacing that the 315s won't stick out. Not a good picture of the rear, but: Perry
  8. pkincy

    Question: Spark plug change

    I support the AC 41-906 although my last set fouled pretty badly. I only pull the drivers side inner fender panel; only 5 10mm bolts #s 1 and 3 I get with a 10 inch extension and a u joint through the panel opening and under the AC compressor. #s 5 and 7 require the EGR hose and the ASR to...
  9. pkincy

    40th Anniversary HOW MANY MILES???

    36,000 on my SF6, 40th Ann Roadster. And it has never had the top erected while driving. I did have it up when I trailered the car from Ca to LV when I moved in 03. But no bathtub ring on my color sanded ruby red paint. Z ya, Perry
Back
Top Bottom