Search results

Is there a question in there or is it just a statement?

Here is the stock '75 steering wheel: Hard plastic rim with brushed spokes. tom...

The vents were part of the Astroventulation system. But on A/C cars they were not operational. But all cars had the grills. Sounds like someone glassed them over. All '74 Vettes were Stingrays. The Stingray name was standard, it was not an option package or anything like that. tom...

Could not even start to provide enough air.......

The casting # for the '68 327 was 3914678 for both the 300hp and the 350hp engines. The Corvette engines were cast and assembled in Flint. tom...

The stock alarm is controled by the drivers door lock. Just insert the key and turn to unlock and should shut the alarm off. To arm the alarm, just use the key to lock the drivers door. The alarm also has a timer built into its system so it should shut off after a minute or two (to keep from...

Here is the slate interior on an '84 I know it is not the right year but still on two years difference. :) tom...

I would take the easy way out and pull the existing motor (if original put it back in storage for future use) and drop in a ZZ crate engine. There is also a company that can supply you with a 6-speed and everything you need to make the swap (mounts, driveshaft, etc). Get everything together...

I wonder, with all the news about $ problems at GM, if they should go into bankruptcy, would all the warranties be null and void?

The engine, transmission, and frame have a number that contains the last 5 or 6 digits of the VIN. That is if thay are original. On the engine it is on the stamp pad, a machined surface on the block in front of the passanger side head. On the trans, believe it is somewhere around the...

For a stock engine any good quality 10w30, or if it is worn a good 10w40. You want the multi-weight so that the oil will flow quickly at start-up and get to the wear points as quickly as possible. tom...

Is that to allow air into and out of the space between the bladder and the tank so that the bladder will shrink as the fuel load goes down and expand when gas is added? Just a guess.... tom...

Agree! tom...

Be careful when comparing HP numbers. The crate engines are all rated at GROSS HP. The '76 was rated at NET HP. tom...

Is it sitting too high before or after torquing down the mounts? What is it contacting to hold it up those two inches? tom...

Agree, totaly aftermarket. tom...

Yep, they work just like the heater core but under much higher pressures, so they can develop leaks. tom...

That is correct. For '74 they went to all black grills. tom...

Yep, first, second, third, and reverse :D

Take a look at your trans pan: tom...