Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. Yellow81vette

    E4ME questions........again

    I purchased a carburetor from guaranteed carburetors 10 years ago and could never get it to work properly. I sent mine in for the core which was a very bad mistake. The carburetor they sent me was from a 1984 gmc truck. When I disassembled it recently the rich mixture stop screw was screwed...
  2. Yellow81vette

    R12a Works

    I purchased a R12a Kit on Amazon for $75.95 and wow. It works great and it is alot cheaper and less paintful than switching everything over to R134a.:happyanim:
  3. Yellow81vette

    ACC wire plugged in above radio fuse?

    This brown/white wire is shorting out my radio. I have unplugged it temporarily. It's plugged in above the radio fuse and i'm having a hard time tracking it. :confused
  4. Yellow81vette

    Help! Body Mounts O.M.G !!!!!!

    The body mount bolts all came out like clock work except for this one. I thought I let the WD40 soak long enough. ,, That was rough, think i'll sit right here.......:hb........and drink a Beer.
  5. Yellow81vette

    Restoration L81

    Georgia L81 Restoration from St. LouisIt was all original and in good shape. I puchased the car off E-bay motors and it took me two winters to restore the underside, but all it needs now is carpet, seatcovers and a paint job. Original rebuilt engine 9.0:1 compression, three angle valve job, fly...
  6. Yellow81vette

    Question: Anyone ever seen these makings before on there L81 or C3

    When I restored the engine compartment I saw these numbers on the passenger side. I think this is a inspection card from the factory. Now I'm restoring the interior and I found the same numbers again on the passenger side.
  7. Yellow81vette

    L81 Front Air Dam Bracket Replacement

    The air dam bracket was broken off when I purchased the car and I finally came up with a fix.
  8. Yellow81vette

    Georgia L81 Restoration from St. Louis

    It was all original and in good shape. I puchased the car off E-bay motors and it took me two winters to restore the underside, but all it needs now is carpet, seatcovers and a paint job. Original rebuilt engine 9.0:1 compression, three angle valve job, fly cut heads done by Acworth Machine...
  9. Yellow81vette

    Help! Need your old L81 under dash wiring harness

    I am very desperate and need the main wiring harness for the center cluster pigtail.
  10. Yellow81vette

    Help! Looking for your old wiring harness

    Looking for someone's old C3 main wiring harness.
  11. Yellow81vette

    Help! Center Gauge Cluster Connector Harness

    I have a bad connector on the wiring harness to the center gauge cluster. I'm looking for just the the 12 wire plug and about a foot of wires. I will pay up to 150.00 plus shipping for it. Desperate
Top Bottom