Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. D

    For Sale 1965-67 Square Port Heads #3856208 & 3904391

    1965 #3856208 head dated E-14-5 $1,000 1967 #3904391 heads with date codes of J-10-6 $1,000 L-12-6 $1,000 D-11-7 $1,000 330-770-2517 for any questions and can ship if you cannot pick up. Can provide pictures as well.
  2. D

    For Sale 1968-70 BBC 427 Warranty Exchange Block, Square Port Heads & Parts

    1968 3919840 square port heads rebuilt dated E-20-8 & F-13-8 with L stamped rockers $2,000 1968 3919840 square port heads with dates of H-24-7 $750 L-11-7 $750 A-28-8 $750 C-13-8 $750 1968 L88 427 factory TI distributor #1111295 dated 7 H 14. Distributor was converted over to points but I...
  3. D

    1968-69 ZL1 Blocks and parts

    All parts are sold.
  4. D

    1969 3919840 Square Port Heads & Lower Horsepower Pulley

    Heads are sold. Water pump pulley still for sale.
  5. D

    1965 396-425HP Block

    1965 396 4 bolt block dated E-27-5 casting number 3855962 with a IE code on front pad. Block was cleaned and magged and is standard bore. $3,000 for the block and can ship if you cannot pick up. I can be reached at 330-770-2517 for any questions.
  6. D

    1969 3919840 Square Port Heads & Lower Horsepower Pulley

    1969 3919840 square port heads dated J-30-8 & J-31-8 cleaned and magged sprayed down in orange primer. Heads will come with all new stainless valves, springs, retainers, studs and guide plates to build $1250 1969-70 #3932430 DW water pump pulley used for 427 390 HP in 1969 and 454-365HP and...
  7. D

    1968-69 ZL1 Blocks and parts

    1968-69 ZL1 #3946052 aluminum tall deck block dated 06017 on backside and is a standard bore 4.40 bore. Block was pressure tested and is a good rebuildable core $8,000. 1969 ZL1 NOS block #3946052 dated 3-1-69 with no stamping on front pad and stamped on underside by spin on oil filter of T 08...
  8. D

    1968 427-435HP Engine Rebuilt

    1968 427 4 bolt engine casting number 3916321 dated K-7-7 and block was decked when rebuilt so no numbers on the front pad. This is set up with the correct 3919852 tripower aluminum intake with new holley carbs #3659's and 4055. The motor has 11 to 1 pistons with dimple rods, correct solid...
  9. D

    1965 396 4 Bolt Blocks #3855962

    3855962 block .030 over dated A-12-5 $3500 3855962 block standard bore dated E-27-5 with IE code $3500 3855962 block standard bore dated F-17-5 with IF code $3500 330-770-2517 for any questions and can ship.
  10. D

    1967 427-435HP Tri Power Corvette Block & Steel Crankshaft

    1967 427 4 bolt block casting number 3904351 dated C-31-7 and stamped T0501JE 7118233. Block is standard bore and has been cleaned and magged with very clean cylinder walls and no damage. Also have the cross drilled 6223 steel crankshaft standard as well and was greased down years ago. Crank...
  11. D

    1969 3919842 L89 Aluminum Factory Heads 427-435HP

    1969 3919842 factory aluminum heads dated 8-20-68 & 12-21-68. Heads have screw in studs and guide plates only. Heads were milled for trueness and are ready to be built. No weld repairs on the set and perfect for a restoration used on 427 L89 optioned corvettes, 427 Copo Yenko options and 396...
  12. D

    1967 427-400HP Tripower Intake & Carbs

    Original 1967 427 400HP intake casting number 3894382 dated 12-12-66 with thermostat housing. Carbs are complete with linkage and move freely and numbers are 3659's dated 724 & 821 along with center carb 4055 dated 821. $3250 for the whole set up and can provide pictures with a email address...
  13. D

    1969 427 Blocks and Shortblocks along with parts

    1969 427 4 bolt CE warranty replacement L88 longblock standard bore 3963512 A-28-9 1969 427 4 bolt CE warranty replacement L88 shortblock 30 over 3963512 dated G-21-9 1969 427 4 bolt T1011LX 19S70738 fresh 60 over all machine work done #3935439 dated F-14-8 1969 427 4 bolt 60 over 3963512...
  14. D

    1967 3919840 Square Port Heads Rebuilt

    I have a nice freshly rebuilt set of 3919840 square port heads without the thermostat boss dated E-18-7 & E-23-7. The heads have all new stainless valves and the springs will hold up to a 600 lift camshaft. These heads were used on 427-435HP tripower corvettes and 396-375HP Camaro and...
  15. D

    1969-72 427 & 454 BBC Blocks, Heads, Crankshafts

    1969 427-435HP 4 bolt block casting #3935439 dated F-14-8 stamped 1011LX 19S70738. Block has been freshly bored 60 over with two sleeves, cleaned, magged and pressure tested fitted with new cam bearings and freeze plugs $2500. 1969 3919840 square port heads off of block dated I-17-8 & I-30-8...
  16. D

    1968-69 3919840 Square Port Heads 427-435HP L71

    First set is bare and cleaned and magged dated L-21-7 and D-23-8 and ported $850 Second set is bare cleaned and magged both dated L-12-7 and in stock condtiion $1250. Third set is bare cleaned and magged both dated A-22-9 in stock condition $1250 Last set is rebuilt and both dated B-20-9 in...
  17. D

    1966 427 4 Bolt block and 1967 3919840 Square Port Heads Rebuilt

    1966 427 4 bolt standard bore block casting number 3869942 dated E-17-6 with front pad stamped T05254D 6J276888. I believe this is a 425HP out of a passenger car but was mistamped from the factory and was intended to be a suffix code of ID. The block was cleaned and magged and I have the...
  18. D

    1969 427-435HP Block and Parts

    1969 3955270 casting 427 4 bolt block 30 over cleaned and magged dated H-26-8 and the block was decked so no numbers on the front pad $3500. I have the original oil pan for $150, 7/16 dimple rods for $250, 6223 steel crankshaft freshly turned 20 under for $300, 8 inch timing cover and harmonic...
  19. D

    1968-69 BBC 427 Parts

    3919840 heads rebuilt F-17-8 & F-18-8 $1500 3919842 single aluminum head (hairline crack in corner) 6-15-67 $750 3919842 single aluminum head (milled) $750 3919842 aluminum heads rebuilt 10-24-68 & 6-2-69 $3500 3919840 heads J-31-8 $1250 3919840 heads J-31-8 & K-4-8 (slightly ported on exhaust)...
  20. D

    1966-67 BBC 427 Parts

    3873858 heads rebuilt and all stock D-18-6 & E-2-6 $2500 3873858 heads bare F-13-6 & F-17-6 $1750 3904351 427 4 bolt standard bore H-18-6 $5000 330-770-2517 for any questions or pictures needed and can ship if you cannot pick up.
Top Bottom