Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. R

    Front Bumper molding

    Need front bumper molding for 84-90. Thanks
  2. R

    radio /fuse link

    I think I have found the fuse link that I fried. The replacement is a link where you can put a regular fuse in it. I hooked it up with a 10 amp fuse and it blew. what size of fuse would be equal to the link that runs the radio,power seats and the door locks. The red wire I spliced into was 5...
  3. R

    turn the key and starter does not engage

    got in the Vette this AM, inserted key,turned key, all power comes on ,I hear the relays clicking, the radio comes on, turned it further to engage starter and nothing, no click dead silence.Battery is good. No codes . got out the FSM I see there is a relay that comes from the CCM and goes to...
  4. R

    Runner bolts

    Boy did I goof up. I had the runner bolts and the plenum bolts all laid out nice. Then I walked by and knocked the bolts on the floor. Where do the shorter bolts go on the plenum?? Thanks Am I having fun yet??
  5. R

    EGR solenoid/Vacuum tree

    While I have the plenum off waiting for my injectors from FIC, I figured I would replace anything that could possibly fail. I noticed the EGR solenoid has a vacuum connection with 2 steel clips facing the passenger side. There is nothing connected and I can't find anything hanging around to...
  6. R

    Injector cleaning

    Hello again! I have one bad injector on Drivers side. This injector came in at 4.5 while all others came in at 16.4. I have 8 used injectors that all ohm at 16.5. Don't see any reason to replace all. Is there any advice on cleaning the used injector before I install it? I know I need the o...
  7. R

    coolant temp. gauge not working.

    Here is another one. All gauges work except the water temp gauge on the IP. My guess is the sending unit. Is that the one I have to remove the plenum to get to? Thanks Bob
  8. R

    still lacking 12 volts to AC compressor

    Replace the AC programmer, now the air blows where it is supposed to. although the blower speed does not seem to blow as hard as I remember on my 93 Vette The head unit seems to work properly. No codes (c68)Even when you pull the codes the 00 shows no problems and #9 seems to indicate correctly...
  9. R

    A/C programmer.

    Does anyone know if the A/C programmer for 1990 is a one year only part? Don't want to buy the wrong part. The dealership shows different numbers for 89,90 and 91. the number for 90 is 88961234. Thanks Bob
  10. R

    A/C programmer.

    A/C clutch does not engage. Changed A/C clutch relay, that's not it. No voltage to any of the system. No codes of any kind. The A/C head unit shows no codes. If the A/C programmer is bad would it throw a code somewhere? Clutch works with direct 12 volts. The defrost button does not send...
  11. R

    A/C compressor

    Hello again. AC clutch does not engage. Clutch engages with 12 volts direct. I do have the C68. Fuse is good. I tried jumping the Low pressure switch, did not work. System has pressure and there are no codes thrown. The FSM talked about a 5 amp under hood fuse, but if it's there it's the most...
  12. R

    oil pressure switch

    HI again from OK. Went to the parts store to ask for the switch they gave me BWD S4087 that shows for gauges, it has 3 prongs, the one I took out has 1. They show that to be for The idiot light (that's what we called them back in the 60's). They did show another one but the thread size was to...
  13. R

    vette will crank,start, die

    Hello from Okla. I have had many Vettes over the years most of the 63-79. And have done several restorations. This is my second C4. Here is what happened. The previous owner cut the pre cats off, bad job. I replaced the entire system, removed all cats. I also removed the guts to the air...
Back
Top Bottom