Search results

Turbo-Hydramatic 400 transmission question: 1) On the drivers side of the case, about 1" above the pan flange, there is a wire harness type thing that plugs into the side of the case. What is it connected to? (wires) and What is it called? Mine is loose and appears to be contributing to a...

For Sale: This is an almost un-used piece I had in my 1980, which I have since sold. I put the stock unit back in for Bloomington and NCRS judging, then sold the car. It is a "Custom Autosound" brand, model CVLV-601, which fits 77-82 Vettes in stock dash without cutting the dash up. Unit started...

Just wondering if there is any power to be gained when using a C4 "off-road" where fedral laws do not apply, By removing the cat. convertors and replacing with straight pipe sections to normal performance exhaust system (Corsa) still utilizing the O2 sensors before the cats and using O2...

Just wondering if anybody is running a Breathless Performance Products, C4 Vortex Rammer as an intake filtering system? And if so, what do you think of it? I'm considering the addition to take advantage of the cooler air in the intake stream. That's got to be a good thing! This is what...

Just wondering if "Power Pulleys" from various companies are worth the cost (about $165) and effort to install? Any REAL gains to be had? or just a lighter wallet? Example would be: ASP power pulleys Any thoughts?

Hello, Just considering using a motor flush treatment on an older higher mileage motor that lack maintenance from previous owners and has a fair amount of sludge type build-up. This motor burns very little, if any, oil, and runs very strong. I've changed the oil twice in a very short...

I have a small problem with the power steering on a 96 LT1. When warm, the steering is normal EXCEPT when you stop and drop down to idle speed or come to a stop sign or whatever. Then the steering effort increases dramaticaly, you notice it very much when parking. I've tried replacing the...

Can you remove the A.I.R. set-up on a 96 LT1 without screwing up anything else? Just cap the ports on the exhaust manifold ( or install headers) and remove the plumbing, cap / seal, the port at the back of the intake manifold, and leave the pump in place, just cut of or remove the rubber hose...

Anybody have any experinces, good, bad, or indifferent. With Shorty style headers on a smog-legal LT1 Corvette? JBA 1815's to be particular, called "Cat 4ward" by JBA http://www.jbaheaders.com (for 92-96 Corvettes) There list price is way high, but some used ones may be floating around (I...

Do you need to do anything differnt from normal when bleeding the brake system after replacing all four calipers and related brake lines? probably lots of air in the system to get out! I usaully use a "mity-vac" and vacum bleed from each caliper, farthest first, then work towards master...

Anybody running "Shortie" headers on an LT1?... If so, do you have any trouble getting the header gaskets to seal properly and not leak? I'm looking at some JBA shorty style headers, used, off a neighbors car. He switched to stock iron manifolds because he said they would not seal very well...

Does anybody here dry there Vette after washing with an electric leaf blower? If so, How well does this method work? Do you still go over it with a damp towel and a dry towel to remove water deposits? Are any water spots or deposits left after the blowing is done (carefull)? Does it work on the...

What is the advantage of using an expensive synthetic rear end lubricant over standard petroleum based gear oil + posi additive as Corvettes came from the factory with? I'm doing some service work on mine and drained out all the old stuff the previous owner put in (Red Line, heavywieght...

What is the best way to seal between the intake manifold and the block on a small-block stock motor when installing the manifold? If you use the "Permatex" stuff, which one? Blue? Black? Any preferred gasket manufacturer? :hb

Does anybody make a 1999 convertibile in white exterior color and that dark red interior color (almost burgandy interior)???? could be any year C-5 for that matter. As long as it's a convertible. Possible Christmas present if I can find one! Thanks,

I was wondering if the transmission fluid flush service that many transmission shops offer for around $100.00 is worth it over the usaual "fluid and filter change" they charge $40.00 for or you do it yourshelf in your garage. Seems like you leave a lot of fluid in the convertor and other parts...

Has anybody tried removing 20+ year old dealer applied, sprayed -on undercoat from a Corvette? I've heard about using "brake fluid" soaking and scrubbing method. And also someone suggested a "Steam Cleaner" or a hot-water pressure washer to do this. Either way sounds like a P.I.T.A. method...

Yes, I am drooling over the 405h.p. right now! BUT,..........I still want a RAGTOP with this kind of performance. Or at least a removable targa top! Gotta hear that exhaust note roar! It's also time for an "Orange" color to make a comeback. Have'nt seen a good Orange since the early 70's Just...

Is anybody going to be selling Zaino Bros. Products at Bloomington Gold thi year ??? I need my fix :upthumbs

On 1996 model Corvette, the Z51 package was available again. It wasn't avail from 91-95. It was not available on 1996 Convertibles, including "Grand Sport" models. My question is, can I install Z51 stabilizer bars on a car (convertible) that came with the base suspension? Stock G.M. stabilizer...