Search results

Replica ZR1 Style Wheels: Lugnuts for 1985 Well, I just received my 17" x 9.5" chrome wheels with GS D3 tires from LakeShore Wheel and Tire, but need opinions or suggestions on what kind of lugnuts to use. I can always buy chrome plastic caps for my original lugnuts, which are reachable with a...

What do you know about the Rhoads lifters? I know that they have been around for a long time. Snake oil??

I'm looking for advice on a tire/wheel combo to supplement my original P255-50 VR 16 Gatorbacks. The car is driven in dry weather, and a ultra high performance tire is desired. Can I use an 18" wheel on this car with no "issues"? If so, then that's my choice. Tire characteristics desired, in...

1965 327/365, slightly modified and runs very strong. Run to redline and beyond occasionally. Need best recommendation for standard duty clutch, but will install HD pressure lpate if necessary. Currently installed, BORG, standard duty kit. Clutch currently overcenters with speedshift above 5000RPM.

Please take a look at this and offer any advice. I am Joe32899. Look at the thread starter "Midyear Boombox Option BBX22" http://www.ncrs.org/forum/tech.cgi/frames/review/210735 Thanks in advance. Joe

Need product names which will cut down on oil consumption. 1 qt/1000 miles is unacceptable for 1967 327/350. Engine has 3000 miles on rebuild. Owner unwilling to re-hone and re-ring.

Is there a rumor about somebody trying to buy up all of the nice 1958 Corvettes?

I remember seeing a post which mentioned a buyer of 1958 Corvettes. Does anybody have contact information. Thanks in advance.

Hello: I own a 1985 with 700R4 transmission, so, I believe that it has a Dana model 36 differential. I have not been able to find the fluid capacity of the diff. in either the owners' manual, or the Shop Manual. Can anybody here help me with this. Thanks in advance. Joe

What products do you all recommend for cleaning a black top from a 1965. Do you use top dressing, or not. If so what do you recommend. The top is as original, with the fine porous texture. I used Dawn dish soap with a nylon bristle brush, which did a good job. It still has a slightly dull look...

My R4 compressor needs a shaft seal kit. After slinging oil for 20 years, it has finally reached the point where it won't hold a charge for more than a few months. I want to remove it and ship to a reliable rebuilder. I need contact information. Also need a source for R12 Freon* to recharge the...

That is in Lahaska, Pa. It is a Corvette only show which takes place in the fall (I believe). I am looking for contact/entry information. Thanks in advance.

I recently overheard someone bragging at a local Corvette show, that he routinely chirped the tires in all 4 gears (yeah, just like the Beach Boys' little deuce coupe). Well I'm not braggin now, but I just don't see it. The car in question is a 65 with 327/365, close ratio, 4.11 posi, original...

This is a red 22,000 mile car. Multiple class winner at Corvette shows. Should I change to a new LS2 engine?

The original Gatorbacks have had it. What should I replace with?

I removed the oil pan on my 327 after about 100 miles of driving on a rebuild, just to check. I can see some vertical lines on 6 of the bores. Looks like the skirts are contacting the bores because the vertical lines disappear about 1/3 the way up the stroke. Should I be worried about this? Will...

How are these best prepped for paint? Thank you in advance.

What are the differences between these. When did the Gen V and VI come into use. Thanks in advance.

Used 1965 Smallblock 2 1/2" Side Exhaust Pipes Does anybody know where I can get a set of used pipes. The section forward of the chambered area has to be healthy, as the chambered sections will be removed. Thanks, Joe

Poll: Whats More "Restrictive: Sidepips Or N11 Fer Midyears" Whose Got The Evidense Okay all you. Whose got the dyno tests to proov it. Im tired of all the bs abbout chambered verses 3 baffled (not 5 baffled) pips. chambered 1 7/8" insid daimeter , verses 2 1/2 diamer N11. Allens aluminide. I...