Does anybody know the value of the ceramic capacitors used on the factory delco stereo radio amps? I'm referring to the ceramic caps on the aluminum heat sink. usually those caps will have a number on them such as 473 472 4700 etc. which is the pf (pico farad) value i'm looking for. The heat...
I have been fighting this no injector pulse situation, could it be the VAT system? The encoded key as I remember on my C4 has got to have somthing to do with this problem. Basically I took a stock harness from an 86 camaro and the whole tpi unit and put it on a truck. So if the VAT system...
Will a TPI car still run if the oil pressure switch is not plugged in? I have the oil pressure sensor hooked up but not the oil pressure swich. It cuts the fuel pump I think. My pressure switch is a 3 prong and the plug is a 2 prong. Can i jump a wire accrosss the plug?
thanx
Hey guys,
I know this is a really common problem but everyone seems to have different problems occuring causing this NO pulse situation. So my question is.. how do you manually pulse the injectors to test them? I have heard of people doing this in the past. My setup is from a 1986 camaro 305...
I have a non HEI didtributor its from a z28 1986-ish. The distributor has two plugs, one is a four prong that goes to the harness, the other is a 2 wire pink and white that I assume is for the POS & NEG on the coil. Atleast I hope so, because I'd like to use this distributor and I'd like to...
I just started on my TPI swap. Thouhgt I had everything figured out ahead of time but as I figured poblems always find their way into the plan.
Problem 1: Im using a stock 1986 camaro z28 harness and I'm not sure how to hook up the fuel pump to it. If anyone has ever used a stock harness...
I know this topic has been beat to death but I have one concern about doing a swap into my 1980. Ive been thinking about this for a long time and Im pretty sure I got it all figured out but one thing still bothers me.. how do you set up the VSS on a turbo 400? Ive heard from many people that...
To start off with.. what type of clutch pedal do the 80 vettes have? Is it a cable pull or a bar type like in the old C3's, do they have slave cylinders at all? My issue is.. i have an 80 automatic but want to make it a stick. I have a aftermarket wilwood clutch pedal but it will not work...
I'm having starting problems with a 94 Lt1. Its in a Z28 but same thing. When I go to start it, i crank it and it starts but dies instantly, I do that about 3-4 times and it will finally run. Once it's running it runs great, no problems.
So i thought maybe bad fuel pump, So i got a new pump...
How would you guys go about tune'n up an LT1? it's in a 94 camaro z28 6 speed. The plug wires go to the front of the motor somewhere (electronic ignition moduel?????) , you know what i mean, there is no room in there to even squeeze in a screwdriver. unlike on a 90 vettes where you have full...
does anyone have or could find a pic of the L88 intake for a 69' or any of the holley intakes. Did they have the holley style square flange, or were they designed like the old Q-jet intakes?
Is there any way to find the Engine Code Suffixes on your car? I have paper work showing that my car was probably a 427 tri-power, but i would like to know for sure so i can buy the correct replacemnt cam etc etc. Anyway of finding out these facts?
I have a vette book and it shows the L88...
Looking for a tri power setup. Other than the $2500 unit from jegs, does anyone else make one? I saw that Edelbrock makes a 3x2 intake for the SBC but nothing for BBC. I wonder why???;shrug
Ebay is worthless, everyone wants to get rich off the originals. Any idea?
I just purchased a set of GMPP oval port aluminum heads for the 427 that I'm building to put in my 69. I got them from a guy who decided to go with a different motor. They were still in the plastic wrap in boxes never touched. I noticed both heads are identicle and want to be sure that its...
So there I was, I took the wiring harness out of my 69 to clean it up and re-wrap it. I noticed my blinkers and such all work off of fiber optics (I had no idea). But the problem is that right where the fiber optic lines go into the firwall they are all twisted and broke. What do i do...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.