I'm embarrassed to ask but, Had to remove the drivers side hush panel to get to a bad relay. Made a "mental' note of how the connector fits into the hush panel and now CANNOT GET IT TO FIT!!!! Anyone have a closeup photo of this or a good description of how this goes back in?? It was so easy to...
Hey all, I've had my 91 for 5 yrs. now and everytime I've taken off my gas cap I don't get a" Wooosh " sound, car runs fine, have read that I should have some backpressure when cap is removed.(cap is maybe 1 yr.old) Is this something to be concerned about? Thanks,Doug
Hey guys, I'm just about through changing my injectors on my 91.Car has 135,000 so,why not...(got the 22lb ford pink tops) anyway,got to injector 4 and have noticed on the intake manifold that about 1/4 of the "lip" that the o-ring seats behind is gone!!. Is this a problem? Hasn't been in the...
So, which do you use when reinstalling the themostat bolts? anything?. The same goes for reinstalling the manifold bolts. This inquiring mind needs to know. Have heard not to use anti-seize on manifold bolts and only RTV, and visa-versa. So opinions welcome! Thanks-Doug:)
Well that's the question. I need to replace the front tie-rods and have never used this type of puller. Where do ya put those jaws and what does the bolt do? This is a job I want to do and not pay a shop,but this puller has me stumped,not only have I never "used this type of puller" I've never...
I need to check the resistance of my fuel injectors. So..once I have my DVM set-up I turn the car on,but not start it,and check the ohms between 15-17. Is this right?:confused :ugh Thanks
Hi everyone, have a chance to get an accel ported manifold and runners(they,re used) these are from another 91,and would be going on my 91. Is it worth the $500.00 he's asking in terms of any power increase? I might be able to get a ported plenum down the road as well. My 91 is an auto with...
Hi all, Have gone through my Helm's manual looking for what's a stock T.C in a 91 auto,no luck, does anyone know? Have seen some 2400-2600 T.C's which I hope will give a bit more seat-of-the-pants feel. Any comments,questions,concerns are welcome!!:)
Is the low side of the a/c the larger line? and if so,could someone help direct me to where the fill valve is(this is on a 91). I see a valve on the smaller(high side) near the radiator,but this low side, just don't see it!!!!:confused
Hey guys!! now go easy on me... need to repalce the horn relay on my 91 coupe. Helm's manual shows it under the passanger knee bolster,within a bank of relays, is this easy to get to? Sometimes the manual makes it sound/look easier than it really is. Thanks:)
My 91's sport seats are having a bladder problem. I've pulled the bottom seat and where the lines hookup to a "coupler" a few have broken off. Is this coupler something I can buy somewhere,or is it even needed(could I just bypass it and hook the lines together)?? Thanks:)
This along with the each side of my top is what I'm planning on replacing over the winter. My question is....an easy job for a novice? or should it be "farmed out" to someone with experience?:)
Hey All, Let me start by saying my 91 auto is running fine. Just have seen alot of engine w/trans and ecm's on e-bay and was wondering if a complete LT1 or LS1 would fit into the 91? Thanks-Doug:dance
Hey guys! need some help. My 91 coupe is throwing a code 32 and it's driving me nuts!!!. Have changed the EGR valve,selenoid,park/neutral switch,and now the ECM,and still get a code 32. Any thoughts??? Thanks in advance:mad
OK guys, getting ready to replace my IAC motor, the new one has a gasket already on it but,inside the box is another gasket. Is this just an extra? or do you use both? :confused
Want to remove the throttle body on my 91,never done it,and looking at the throttle cables leaves me:confused . I,ve got a Helm's,but can't find a good description on how to remove/replace the cables.Can anyboby show me the light:cry
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.