Search results

I lucked out, I found the rings at Ecklers and the tool I got from Grainger. Now all I have to do is out it on! thanks for the help!:w

I have a 1986 and am stumped at this point. I removed the EGR tube from the exaust manifold and for the last month I have been looking for a new "compresion ring" ;shrug(if that is what it is called) to re-connect it to the manifold. where can I get one of these or even better is the a different...

Thanks for the reply. I live on a real bumpy road and the car bottoms out 4 or 5 times a season, I have taken the x support off and bent it straight but that lasts about a week or two. My other thought is to see if I can get an exhaust place to make a pipe with a different bend so I can get...

On the 86 convertible there is an “x” frame support under the car. The exhaust runs so close it will rattle against it. I am assuming it is there to give the frame better structural support but I can’t imagine it does a whole lot. Would there be any real down side to permanently removing that...

Thanks for the info! I will be emailing them today. I also agree, MidAmerica has always been $$$ for most things.

I know the price must vary but what should I expect to pay to have the cluster fixed?

BigRed, I re-soildered the pins on the connector and cleaned them. I looked at all the other pins and everything looks good except where the four back lights connect to the board it looks a little burned. As I mentioned I cleaned everything I could then put it all together. When I plugged it...

Thanks 87Callaway! When I removed the cluster I located the two ground wires on the connector. I then spliced them and ran a new ground but that didn't have any effect. It seems strange, the LED's will light up but the problem is that they are faint and all of them stay lit. Is it possable that...

I am new to this forum and I have a question which I am sure has been discussed many times before but here it goes. I am having problems with my digital dash. When I turn the car on the dash will faintly light up and it appears as though all led's get lit and stay lit so it looks like it...