Search results

sold sold

Lets see some pics of mandrel bend exhaust. I have decided to build my own mandrel bend exhaust and want to see what some of you have done with the exhaust. I have 75 with a th400 so any help is appriciated. Thanks in advance.

Has anyone ever used the summit h or x pipe on their vette. How did it fit and are an h or x pipe worth it.

Who here has rebuilt their th400. I just bought the Haynes General Motors Automatic Transmission overhaul manual and have read throught it. Is this a difficult task for someone that has never rebuilt a tranny before. I am also going to be purchasing a dvd if i decied to rebuild this tranny. I am...

ok im going crazy depending on what path i should take. As we all know i got the bad end of the deal on my motor build using crap somg heads and rpm cam . Well I was planning on using some vortec heads upgraded for more lift with a comp xe262 cam and an air gap intake. Well I have been...

Need some cam input. 350 Vortec Heads RPM Air Gap Intake 670 Holley Street avenger Carb 9.5 compression which cam to use? Comp xe262 Duration @ 0.050" 218 / 224 Max Lift w/ 1.5RR 462 / .469 Lobe Separation 110 Lobe ID#'s 5442 / 5201 Intake Centerline 106 or Lunati 60102 60102LK 262/268...

Has anyone used Derebery Performance they have a vortec head kit that looks pretty good here is the description New Vortec, Hydraulic Roller, Heads, Cam and Intake Kit $1,499.00 New hand worked Vortec Cylinder Heads with swirl polished valves. 2.02” Intake and 1.60” exhaust. This kit comes with...

ok i post a long time ago about this but fiqured since its been a while i would ask. For those who run vortec heads what have you dynoed and what is the setup. So post thoses dyno numbers

I was looking through this engine combo web site that was to me recommend i take a look at. and i ran across this one i would like some feedback on what you guys think of it. It was based on a 350 but i would do this to my 355 also i would chage the cam to the lunati 268 instead of the comp...

anyone every use a wiring kit to rewire your car if so what kit did you go with or what is a good kit to go with. I do not have factory gauges or stero so even if i buy a factory harness i will have to cut it up.

Are these good heads how do they compare to the sportman 2. I am looking at the ones form sdpc they have a kit for 900 bucks. The combo would be 350 bored 30 lunati voodoo cam 60102LK 262/268 219/227 .468"/.489" 112/108 Hyd/Hyd 1400-5800 Weiand Stealth duel plane intake and a holley 770cfm...

Does anyone use these heads if so are they good or bad. Here is the combo 355 World Products Sportsman II heads lunati voodoo cam 60101LK 256/262 213/219 .454"/.468" 112/108 Hyd/Hyd 1000-5500 or lunati voodoo cam 60102LK 262/268 219/227 .468"/.489" 112/108 Hyd/Hyd 1400-5800 Weiand Stealth duel...

Anyone here use this cam or something similar? do you like the cam, what heads are you using and intake and carb. Also if you have an automatic my car is th400 what stall are you using. Here are the specs of the cam for reference. Intake Duration 050 inch Lift: 234 Exhaust Duration 050 inch...

350 bored over 30 Lunati Voodoo Cam 60102 @050 219/227 lift .468"/.489" Trick Flow 23 Degree Aluminum Cylinder Heads Weiand Stealth Intake Manifold Holley Street Avenger 770 cfm Is this a good combo. what kind of numbers might i see with this combo. Can i still use the stock tq convert with...

Help me build my 355 specs Block 350 bored over .30 Vortec Heads Vortec Weiand Intake Holley 770 Cfm Street Avanger 10:1-10.5:1 Compression Need help on choosing a cam i would like to keep the factory stall if possible but do not want anything over 3000 stall This is going to be a street car...

Has anyone used one of these or know anything more about this kit weather it is good bad or ? Here is the link to the kit. http://www.holley.com/products.asp?product=300-503-1 Any info would be great thanks

has any one used these. I have posted before about my motor problems and the guy that built it. I am thinking about going with this...

I want to here some input from people that have build motors for your cars. I am needing some advice on a good street motor. As I have posted before I got the bad end of the stick with my motor build. I want a good hp/tq number I am thinking about 350-400 hp and 380-up tq. My motor in the car...

Okay here is what i have planed to do to fix what the moron built me for a street motor. The bottom end is bored over .30 so i have a 355. the builder used my l48 heads and a edelbrock cam that requires at least a 3000 stall. so I am going to go with this 350 chevy bored over 30 GM vortec heads...

I need some advice on a carb and intake and torque converter. Currently i have a 600cfm holley 4160 but I do not think it is enough to get the job done. Comp cams says to ues a big carb for my cam. here is my specs on the cam. my motor is a small block chevy 350 bored over .30 with 10.5:1...