Search results

Like the title says, the drivers front caliper jumps over the retaining pin. The pads are installed correctly, and the spring clips are installed on the bottom of the pad. I've replaced pads and pins (multiple times). I can see no physical damage to the caliper mount and the rotor runout is...

I got my FSM and have spent many hours since reading and researching. I'm having a no heat problem. The dash vents have not worked for the ac for a while. All air comes out the defrost or floor. When I first reinstalled the hvac head we had heat or ac on demand thru the temp selector. Now I just...

I did a search here, but didn't come up with much. I'm looking at code scanners and just don't know what to get. I see hand held code readers like they have at Auto Zone, laptop programs for code and more sophisticated diagnostics, and even a website that gives you about everything you might...

My climate control started acting up this summer when it was 115 degrees. The AC has not blown out the dash vents in a year or so, only the floor and defrost vents. During the summer heat wave it would sometimes blow cold air, then switch to hot then back to cold. Recently, I would turn off the...

My heater blows only cold air. I assume the door is not opening. It worked before I replaced the ac compressor clutch. I recall only one plug that was removed and reinstalled. Any ideas? Places to start looking? Thanks in advance.

Got two code readings. P1441, and P0420. Anyone have info on what these codes are? Thanks in advance.

Is it possible to bypass the ac system on a 96 LT-1? Different pulley? Shorter belt? Thanks in advance.

I'm replacing a rear hub assy on the 96. The book says its a torx head. Can anyone tell me what size torx? I've tried, but there is no way I can see in there. Thanks in advance. Curt

The hood release feels mushy. Passenger side pops open, drivers does not. I know the hood is slightly out of alignment. When I push the drivers side back down, I can hear it click when it locks, so the cable is at least releasing the catch, but maybe not enough. I need to get under there and...

I finally got the parts for the steering column, and its back in the car. It does not crank. I have 12 volts on the large yellow wire from the plugin at the ignition switch on the column with the key in the start position. No voltage at the solenoid. I can jump the solenoid and the car will...

Hey guys, 1st post from a newbie here. I'm working on my girlfriends 96LT-1. Trying to remove to the steering column to do some repairs and I'm stuck at the flange on the floorboard. Electrics are unpluged, and the coupler forward of the fire wall is loose. The column is loose, but it looks like...