Title says it all; no cracking, all the switches work, lights work, no broken tabs, and the seal strip is new. Car has 32k on it.
Power mirror switch, and power window switches, on driver's door panel are NOT included, nor is the bezel to which they're mounted. All screws are NOT...
edit:
Rims are listed now on eBay @ $360
http://www.ebay.com/itm/251230363984?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
------------------------------------------------------------------------------------------------
OEM Sawblades from my ZR1. Not new, so I'm calling them 'Great' -...
Title says it all; no cracking, all the switches work, lights work, no broken tabs, and the seal strip is new. Car has 32k on it.
Power mirror switch, and power window switches, on driver's door panel are NOT included, nor is the bezel to which they're mounted. All screws are NOT included...
I have the high idle at coast-down, hard hot restart, as described in the TSB that Rob linked me to here.
Corvette Action Center Knowledgebase :: 1990 - 1991: Service Bulletin: Hard Start on Hot Restart / Increased Idle Speed
Where do we get this upgrade module(?)
The brake pedal in this '90 has just a little play - maybe 3/4" - 7/8" travel, before the brakes tighten up. A second stroke on the pedal, and it IMMEDIATELY tightens up.
Where's the air? In the line? Or in the master cylinder?
Or could the lines be collapsing? (car has 32K on the odo)
ed.:
Seat are sold...
================================================================================
I got a set of Black fabric seats for my '90 (don't like leather), and these Camel / Saddle color (don't know the factory RPO # for this color) seats gotta' go.
Embossed 'CORVETTE' into...
I found black & grey door panels at the same place that I'm getting the black cloth seats from.
BUT - door panels are from '94 - '96 year model, and mine is a '90. Anyone know if they'll fit?
Anybody know where they might be had?
I want the Grand Sport design - black A-molds, 17 x 11" x 2, and 17 x 9.5" x 2, and the ONLY thing I can find so far is the newer design, marketed as Deep Dish. uGH .
Attached snappics of my '94, and another of the new 'Deep Dish', which is IMO uGLy...
My ZF will be for sale after it's removed from the '90 LT5 (I can't do a stick well, since meeting a drinker head-on several years ago). It has 32
K mi on it, documentable, and an auto is going in its' place.
Price is negotiable - going by the 'Sold For' prices on eBay. Send a PM at me...
New fuel filter is on, and we checked static fuel pressure afterward; 16 PSI.
No leakdown. From 48 PSI the other day, it was at 45 PSI after 15 minutes+++...
Bled it off, and lit it up again: 18 PSI
No leaks at the pump lines, the filter, or at the guage connector...
Full tank; how to replace fuel filter...
I loosened the lines, and it started flowing good.
If I dis-connect the line in the pic, will the flow stop from the tank?
How many fuel filters in a '90?
Should plugs be changed at 30k? Do they take a hit from 'time'? And plug wires?
She spins for 10-12 seconds before starting up. Sometimes a second attempt is necessary for 10-12 seconds.
Static fuel pressure holds 48, bleeds to 45 after 15 minutes.
Closed...
While I wait for clutch hydraulic parts, which might put me at a standstill on that thread, we got another one to pic up on...
I did this one already on the '94 - don't know if it was here or the other places, been a couple of years.
Can't remember which parts from the new kit I cannibalized...
Another repair; with pics for reference.
Clutch hydraulic linkage has leak(s). Master was found empty, after getting me home 30 miles after purchase, and another trip to the gas station. Pedal was soft before, and now it's dead, with entry into NO gears. You pay $16k, you should get more than...
'R' was hard to get into, but 1-6 was no problem. Today, I couldn't get 'R', 1-6, c,d,e, ANYthing. Shut the motor off, and everything was hunky dory with the stick.
No puddles under the car.
Ideas? What to start on? Is the slave cylinder hard to get to?
I've only gotten it engaged 2 times. Right now, I'm stuck in my carport, and I'm about to call the PO and see if there was a problem, or if there's some lift or swing of the stick, to get it.
Anybody? Is this an issue with this tranny? I don't have FSM or Owner's Manual yet here...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.