JJ2k: Are you saying that if I have only one remote now, that may be the problem? I have had only one working remote for a couple of years, one quick working years ago. Not even sure where it is. When the second stopped working I replace the battery, resynced now it doesn't. Problem is I have to...
The second remote for my car has stop working, it will not reprogram using the lock-unlock 7 second hold. I replaced the battery. Reporgraming would hold for less than a day and had to be redone, now it won't reprogram at all. If I buy a new remote and I have found plenty of other threads on...
The method I used see link above on my last post to this thread. The fix lasted about one year the first time. I repeated the method after cleaning off the old RTV and it once again is holding. Tom
My power antenna has just stopped working; the antenna is almost all the way up. When I turn off the ignition I hear a clicking sound from the trunk and then it stops, but the antenna goes nowhere. Is it time to buy a new module? Any ideas where I can get a good price? Thank you for your...
I drove my vette one winter, and it handled very well in up to 8 inches of snow. Over 8 inches, I couldn't get any traction as too much snow piled up under the car and lifted the wheels off the ground.
I run 30 psi as recommended, using a dial type tire gauge. The cold pressure will vary based on the changes in outside temperature. 10 degree increase gives me about 1 to 2 psi increase on the pressure monitoring system.
I purchaes ti at the locat automotive supply store. I left the supports and tape in place for 24 hours, follow the direction on the tube. I used a very small bead of material, pressed it out using the top and then taped it.
Ok I made the repair in September, and it still holding.
I used Permatex Item #81158 Silicone adhesive.
Build a wooden frame to support the rear window from the inside.
Frame has rubber in the vertical arms to help grip the window.
The middle support piece has single nail at each vertical...
Thanks for all the suggestions. Just to bring you up todate, the bottom fell out, or should I say the glass let go all across the top of the window. I have been researching RTV, Loctite and 3M materials, haven’t made my choice yet. I believe that I have a fix, will provide pictures if it...
I discovered today that the window in my top has started to come un-glued, upper left corner to be specific. Look like the gule has dryed out. Otherwise the top is in good shape, the car is garaged most of the year. How to I affect a repair? Any suggestions? Thanks for your help!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.