Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. 4

    8 Speed Torque Converter leak down causing 1 - 2 upshift slippage

    My early build 2015 Z51 automatic exhibits a "slipping condition" upon drive away when sitting over night. GM says they are aware of the condition and are in the process of readying a fix. Seems the fluid drains from the TC when sitting and must pump up before drive-away. I performed a test...
  2. 4

    Popping and cracking sound from roof (coupe)!

    My 2015 Z51 Coupe emits a "popping and cracking" sound from overhead when the roof is installed. When I remove it the noise goes away. I note that earlier C6 owners had this problem and GM issued a fix bulletin and replaced the roof if the fix didn't work. Anyone else experience this? I have...
  3. 4

    2015 Cpe. Making "plastic binding" sound in roof area

    My 2015 coupe is making a popping and cracking sound overhead when the roof is installed. It seems to get worse as the ambient temp. raises. I have removed the roof and it goes away. I have used silicone grease to lube all obvious areas to no avail. Anyone else experiencing this? Since my...
  4. 4

    Experience with "DiabloSport Tuners"

    My 04 Z06 was modified back in 06 with a VaraRam ram air, Melrose long-tube headers, Random Technologies cats and a Corsa cat-back. It's been running great ever since (15,000 miles currently) until I decided to clean and inspect the air filter. Opened it up and wow! There's a quarter inch piece...
  5. 4

    Any experience with DiabloSport Tuners?

    My 04 Z06 was modified back in 06 with a VaraRam ram air, Melrose long-tube headers, Random Technologies cats and a Corsa cat-back. It's been running great ever since (15,000 miles currently) until I decided to clean and inspect the air filter. Opened it up and wow! There's a quarter inch...
  6. 4

    Check Engine Light

    My 04 Z06 has a VaraRam cold air package. Recently I upgraded the air filter to their latest pleated and oiled replacement and in the process, I dry wiped some residue from the mass airflow body. I didn't touch the wire nor did I use any cleaners. Shortly after completing this upgrade I...
Back
Top Bottom