Hello, folks,
I currently have an aftermarket (14") steering wheel installed on my 63. It is comfortable, but my tolerance for 'armstrong' steering has diminished somewhat in the last 20 years.
Are there any 15" factory GM steering wheels that will bolt up to my 63 steering hub?
Thanks in...
Hello, folks,
Should the vented gas cap on our Corvettes relief pressure in both directions? Or is it a one-way relief valve?
I opened the gas cap three times yesterday afternoon, and three times I experienced a substantial relief of air pressure from the tank (like opening a can of soda, only...
FOR SALE: 63-67 Restored Windshield Washer Pump, purchased from Eckler's (#43042) a few weeks ago, but never installed. I ended up purchasing a restored windshield wiper motor complete with washer pump, so this unit is extra.
$90.00 plus shipping - and no core exchange needed! :upthumbs
FOR SALE locally in the San Francisco, CA Bay Area.
These trailing arms were removed from a 1965 Corvette back in 1987 when I was considering converting my 63 to disc brakes, and have been sitting in careful storage ever since. $300 for the pair.
Hello, folks,
I am in the process of replacing the heater box assembly in my 63.
When I originally removed the core, there was some kind of sealant (dumdum maybe) between the heater core mounting frame and the heater box. I was hardened and somewhat difficult to remove. I'm pretty sure Bubba...
I am looking for a new/rebuilt/reconditioned windshield wiper motor/pump assembly for my 63.
Does NOT have to be correct.
Please email with price and pictures to buhagiar@pacbell.net.
Thanks in advance!
Hello, Folks,
I need some assistance. I am in the process of rebuilding the steering column on my 63, and I am confused about the replacement upper bearing assembly as provided by Corvette Central. This is what I got...
Hello folks,
I just purchased a Motive Products PowerBleeder tool, and I'm ready to do the brakes on my 63.
All of the brake components are brand new, from the master cylinder to the lines to the wheel cylinders. Do I still have to bench bleed the MC, or can I just bolt it up to the firewall...
Hello, Folks,
I have just removed and disassembled the steering column on my 63.
Can someone tell me how far down on the steering column tube the turn signal housing (mast jacket?) is supposed to sit? I noticed that the tube is 'keyed' to index the housing in the proper location, but there...
I'm finally getting around to reassembling the heater box on my 63. Questions:
(1) What is the best adhesive to use for attaching the new foam pads to both sides of the air flapper door inside the heater box? 3M weatherstrip adhesive comes to mind; or maybe spray adhesive?
(2) There is...
For your perusal:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4505524255&fromMakeTrack=true
This car doesn't appear (to me, anyway) to have the big tank option...am I missing something?:confused
Just curious...
UPDATE: The seller acknowledged the error...but you have...
Hello, folks,
Got the heater box out on my 63 to replace the core. Now that I have the box apart, I have some questions:
(1) There is some surface rust covering the metal partition in the box behind the heater core. Should I bother trying to clean it up? If so, what should I use? I was...
Hey, folks,
Why so much for a 67 steering column?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2493885704&rd=1&sspagename=STRK%3AMEWA%3AIT
I doesn't even appear to be a tilt-tele, though I'm not sure...
Just curious.
Hello, All,
Although it would not be 'correct' :eyerole , would the press molded carpet being produced for a 65-67 Vette physically fit in my 63?
Advantages?
- Fewer pieces (21 vs. 10);
- Cleaner finished appearance;
- Costs less.
Thoughts?
Hello, All,
I have just finished completely rebuilding & reassembling the front suspension on my '63 convertible. I am ready to apply grease to all of the ball joints, tie rod ends, idler arm, and relay rod. Is there a good way of gauging how much grease to put in? I don't want to overdo it...
Hello, All,
I may have a chance to acquire a complete convertible top assembly for my '63. It is all there, but the frame is rusty (especially on the front, in the corners) and will need to be repainted and reconditioned (weatherstripping, etc.), plus, of course, it needs a new fabric top (it...
Hello, all,
Perusing E-bay this morning I came upon this quote in an ad for a 66 Corvette:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2490662950&category=6168
"...Vehicle's history: None. Nada. Zip. Zilch. Zero. No bogus window sticker, no reproduction protectoplate...
Hello, all,
I'm looking for a Corvette wheel alignment specialist (C2 or C3) in the San Francisco Bay Area, preferably close to South San Francisco. Any recommendations?
Thanks in advance for the assistance!:beer
Hello, all,
I'm looking for a Corvette wheel alignment specialist (C2 or C3) in the San Francisco Bay Area, preferably close to South San Francisco. Any recommendations?
Thanks in advance for the assistance!:beer
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.