Search results

I’ve been working on this issue, for some time. Hard start,no start, replacing just about everything except ignition control module? Code 0100.:hb I’ve replaced the MAF twice; the air filter, replaced distributor to MSD unit replaced spark plugs, MSD wires, and coil, replaced CPU. car runs...

Installed newplugs, new distributor, new coil, still no start pined the under dash plug andgot these numbers C12 1 , 9 H65, 1.0 then nothing after that it did not repeat. Is that the MAFneeds replacing I blew a radiator hose some time back any help is appreciated. 96 manual LT4 thank you

I have my Opti out for the third time trying to solve a random misfire issue I have two questions I think I will replace the distributor as replacing the cap and rotor did not cure the problem. So I now have two issues. Should I purchase a MSD unit or ACCEL ? Also one other issue that has been...

Decided to replace the distributor cap quite a preformence and replaced all new plugs AC 41-943. After finishing it would not start so used some starting fluid with no air cleaner on it sounding terible and missing would not start with out using the starting fluid so decided to remove the...

C4 LT4 96 6 speed. Blew a hose actualy had a spare in the car replaced it and drove on. 4 days later car developes a hard to start condition some times will start and run however when at idle not all cylinders with RPM increased seems ok. and drove fine now wont start have opened all connectors...

I would like to replace the universal joints on both sides is there any way of doing this with out disturbing the rear wheel aligment?;help

Why cant I turn the rear wheels with car on a jack, out of gear and brakes off ? 96 LT4 :confused:confused

96 LT4 I have a tire issue I would like to try 275/40/17 on the front and 275/40/18 on the rear is this workable. I read somewhere if front are too big it will interfere with steering tracking. I now have 255/45/17 on front and 275/40/17 on rear. Rags :w:w:w

On moving fwd at slow speed I have lots of clicking and squeaky noises from the rear end does but stops at about 10 mph. Anybody know what caused this? Do I need to replace all the rubbers in the rear end or would it possible be Universal joints or something in particular any advice would be...

Lights stopped working in the front part of the cab, no doors, no under dash, no light on rv mirror. When entering car that light only works now with key turned on. Any suggestions would help lights in back section work when opening doors fine :w:w:w

Can anybody recomend a good book on tuning a LT4 1996 manual 6. :w

I know it an old one but, just replaced the top radiator suport and now she just wont start cranks good and then smell of alot of fuel dident touch distribitor check and double checked all my work this has never hapened before any help would be apreciated, 1996 LT4. Ray :confused :o ;help

Can anybody help. Im looking for a Vapor Canister Purge Valve the electric one and all I seem to find are the smaller units that are not electric. 1996 LT4 6 speed Ray :W

What a day Has anybody ever changed a ECM mounting bracket 4 hours upside down most of the time under the dash. If anybody needs any info on this job let me know. Thinking it was steel and ECM was not sitting right so decided to bend the bracket of course it broke thus the new installation. C4...

Does anybody have the same problem when turning off lights they close down and the elect motor still run on for a few seconds. Wondering if there is a hidden problem or do the need some adjustment C4 1996 LT4 Ray :confused

Have flat spot an low rpm accelerating usually in second gear. I have only one MIL 1441 non purge. Don’t really think that it has, anything to do with the problem. C4 1996 LT4 manual 95K miles. Any feed back would be helpful Ray :v

I have purchased some wheels 17 and 18 is there a need for a correction to the speedometer because of the larger rear wheels? Ray

C4 1996 Has anybody ever replaced the third tail light with a LED unit. not the lens. Seems tight? Ray :v

C4,1996 LT4. I seem to be here all the time but thankful for the information all have given me. As a 1 month owner and still fumbling arrount pulling things apart and loving it. I was wondering everybody’s views on scanners. I have a Memo Scan U581 and it is ok, just trying to track down codes...

Where can I purchase the two volumes that don't cost a arm and a leg C4 L4 1996 manual ;help