I have a radio from a 1970 vette that I am trying to bench test. I put 12.0 volts DC to the input and ground it properly. I have a 10 ohm original working speaker. I get twelve volts to go thru the radio and come out of the wire harness that feeds the convector/amplifier. I can also make the...
Will a radio out of a 1972 fit my 69 coupe. Bubba chopped out the bezel and went aftermarket. I have access to a 72 radio, part number 7937571. Possibly the only difference would be the knobs ? any input would be helpful. Thanx
My thoughts exactly on the transposed numbers. Thanks Midnight, its good to hear from law enforcement that I am good to go as long as tag and title match. Its just a Midwest daily driver L-46motor ,4 speed but its mine and don't want to lose it.lol
My thoughts exactly on the transposed numbers
My vin tag is not a GM original. Looks to me that it was re-issued thru the state of Ohio. That would explain the asterisk before the numbers and the difference in the spacing of the numbers. Still don't like it... but as long as the tag matches the title I will live with it. I am sure it will...
I am trying to confirm a vin number and need to lift the body to access the top of the frame by the #3 mount. is this very involved . any advice would be appreciated. The number at the # 4 rear body mount is not there due to a rear collision and bubba repair
production numbers on C3
Thanks for the info. I will try and get a decent pic posted. does appear the spacing between the numbers is larger than the images I have looked at online . possibly remade and done incorrectly or I have been taken by BUBBA. That 3953060 number was under the top cowl...
my title matches my vin number.............. BUT........ numbers have been inverted making it an impossible number since they did not produce 77 thousand corvettes in 69. The car series number 7 was flipped with the first production number 1. Is it possible a vin could have been stamped wrong...
vacuum lines
Thanks guys for the info. The port on my intake did take care of my vacuum issue . Headlighs and lift gate are happy again. The Vacuum lines for my headlights have always been on the carb but the holley had a much bigger port and more vacuum pull.That doesnt mean it was right, it...
I installed a new 1406 edelbrock and ran my distributor vacuum to the left port (passenger side of carb ) the pcv hose to the middle port and manifold vacuum to the right port.Car started perfectly but headlights and wiper gate not happy. No issues before with the holley set up. No leaks that i...
I have 12 volts at this switch and it is wired as a normally closed switch.this is confusing to me,I would think it should be normally open and held closed by the wiper door bracket arm.It is working in reverse right now.is this a matter of switching leads or is there a wiring problem somewhere...
I have worked out many leaks and faulty vacuum switch relays on my 69.BUT !!!!! my wipers come on faster than my lift gate can open. The wiper switch cuts vacuum to the lift gate as it should.But the wiper motor is too fast for the gate.Any adjustment or delay possible on the wiper motor. I only...
17,403 out of38,762 is this considered an early build or late ? looking for some info on my vacuum system and seems to me I need to know this due to some changes. Any thoughts would be appreciated
too much carb ?
Thanks for the info guys.Sound like I have plenty of homework to do.I do like the fact that my carb is a good fit.Just need to get it all dialed in.Thanks again.........................................Lou
VIN# on 69 coupe
other than human error I can not explain it.If the title was lost at one time and reissued maybe the mistake was made at that point.inverting those two numbers would be an easy mistake to make. Just cant trace it back. Going to try and find the chasis numbers and hope they...
my vin number on the pillar matches my title.Thats the good news..The Bad news is the production number it is giving me is impossible. the last six numbers on my pillar are 177500.Any chance these numbers were inverted and not caught by inspection. 717500 does make sense, and this number also...
too much carburetor
Thanks for the input Lars.I was hoping you would jump in on that question.I will go over my carb again to insure all is well and work on my driving habits.I really did not want to spend 4 or 5 hundred on another set up.living in Ohio I still have a couple months before I can...
to much carb
as far as I know the cam and cylinder heads are stock.I do have hooker headers and side exhaust.I would agree that 650or 700 would be a good fit.The car runs very well and never stumbles or loads up .I can just smell that it appears to be running rich.I found a web site and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.