Ok, after 10 years of sitting in my back yard, my 75's rotors really need to be re-surfaced or replaced. I just bough all new rotors for the front and the back, but when I started I realized it looks like the rotors are riveted on. My question is, is it hard to drill out all of the rivets and is...
I want to swap my Rochester 4 Barrel to something new. My vettes been sitting for 10+ years and I just got it started today, but its leaking from every section imaginable. I want to put an Edelbrock 1405 or a 1406 on it but im not sure how hard its going to be to cap off some vacuum lines or...
So how should I hook up the lines? I used a clear tube and sucked in and fuel was coming out of the smaller diameter line, but if i sucked on the larger diameter, nothing was coming up. So I should put the larger diameter tube into the IN tube on the pump and put the small line on the return...
I just got my hood opened on my 75 after sitting in my back yard for a few years. Ive replaced a few things and did a tune up, but now im having some problems. The Fuel pump I pulled off only had 2 lines coming off of it. I replaced the pump because the carb wasn't getting any fuel so I bought a...
Hi, i have been looking for about 3 hrs and cant seem to find a free pdf owners manual for my 75. dont want to buy one because i only need to look at it for hood assembly. Thanks!
This is what the cover looks like!
Honestly i just want to get the hood open. I know how to install a hood release on a vette cause i did if to a friend on his 79. I just want to get this stupid thing open for my dad because i want to drive it in the future.
Hood problem on 75
The only bad thing is i have a 75 and it doesn't have the rubber grommets! is there a way to access the cross over cable from underneath? maybe with a coat hanger?
i have tried everything i can possibly do to open the hood on my 75. Theres no rubber grommet because those were made in 76 because people were complaining about not being able to open the hood with a broken hood release. I think my drivers side latch is rusted and stuck. I have that thing on...
after just looking around on the internet, i finally decided to take matters into my own hands. i got a jack, and jacked up and got under. i thought that if i could just get my hand up there and release the driver side that it would in return release the passenger side. now i can tell without...
Re:
Hey thanks for the website! i was looking at the Rear Bumper for the 75 but there is no price? can anyone look at the website and figure out how much it is? thanks. Ckid
the rear fender on my 75 is cracked from all the years sitting in my backyard. mainly from heat/cold because i live in washington and you never know what the weathers going to be like. i was going to see if anyone had any ideas on were i could purchase one of these pieces. and also how much it...
hey sorry for the wait. i have been looking for my vin number but i cant find the paper. i had it in a lockbox, but its not there. so i have been trying to find it. when i do ill have the key made and reply to you guys. thanks for all of the advice! Ckid
Re: Re-Key
Ok... The cool thing is, is that i don't have a remote for my vette. its a 75 so it doesn't have the remote unlock/lock. all i need is the ignition key for the door's and the ignition.
i haven't been able to find my keys for a very long time... i was just going to see how much, and were i could get the tools to re-key my vette. Thanks;)
thanks!
hey thanks for that link! i guess the only way i can get the hood open on my 75 is to get under it and reach up to the hood release that way. or take it in. only hard part is getting it out of my backyard, and put it somewere where i can get under it. if u can think of any other links...
video
thanks for the video, but in the video he shows that u push in that little rubber plyg. my vette dosent have any of those... if u have any other ideas that could help please inform me... thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.