I had the entire interior out for cleaning after purchasing,this plastic cover was left over and I do not know where it belongs.Anyone know what it is and where it goes??It is approx 1 in square in size.
Currently considering a 98 6spd with 64k mi,have not driven it yet, nor have I ever driven 6spd.
Any tips on evaluating the trans operation and condition of the clutch.
It is at small independent dealer.Overall veh appears to be stock/unmodified,,
Overall,does not appear to be abused other than...
noticed a creaking noise in the rear that was most noticable when backing out of drive way over a curb on an angle causing the body to flex or when jacking the car from the rear. I could not find anything obv loose. I decided to check the 4 rear susp X-member mounting nuts. Re-torqued them to...
New Left side Differential Cover for 97-04.This will replace defective covers that leak due to excess porosity or incorrect machining tolerences.
This part carries a GM part# 12458145 and has a dealer list price of $176.59.This cover includes the output shaft seal and cover O-Ring already...
These items are the 2 seals required to correct the common problem of leaking of the left side differential cover/left output shaft seal on 97-04 corvette.These are OEM GM parts produced by Getrag Dana for GM.The O-Ring seal for the left side cover carries a GM part# 12457739 and has a dealer...
I am evaluating non runflat replacement tires for my C5. Anyone have any experiences with the Falken FK 451 series tires,[wear,noise,Tire Pressure Monitoring System sensor issues?] thanks for any input
Any C5 Experience with Kumho tires?
I am evaluating non run flat replacement tires.Does anyone have any C5 experience with Kumho MX series tires as related to noise,wear and specifically does the construction/design interfere with the tire pressure monitoring system?
I noticed a creaking noise in the rear that was most noticable when backing out of drive way over a curb on an angle causing the body to flex or when jacking the car from the rear. I could not find anything obv loose. I decided to check the 4 rear susp X-member mounting nuts. Re-torqued them to...
part# 10313384 is the lid protector which is the black insert that the #5 bow w/s sits on when the top is in the up position.This is a revised part that is referred to in TSB# 01-08-67-003 [Squeak from Rear of Convertible Top].
The revised part has a more course finish than the org part's...
Just replaced the conv top #5 bow weatherstrip with the replacement part# 10319827,it has a insert inside the area of the weatherstrip under the window area,which prevents the weatherstrip from compressing and keeps the top from touching the tonneau cover
I noticed a creaking noise in the rear that was most noticable when backing out of drive way over a curb on an angle causing the body to flex or when jacking the car from the rear. I could not find anything obv loose. I decided to check the 4 rear susp X-member mounting nuts. Re-torqued them to...
I have a small sears type opener that I clip onto the top edge of the console tunnel carpet just below the parking brake handle,
it's easy to reach I don't have to look at it from my position
When its time for tires I'm going non EMT with an portable air compressor and tire plug kit,If the warning sounds for a flat, the tire can be aired up and pluged on site.
My 98 conv has a buzzing noise coming from the instr cluster area,it seems to occur at low speeds 5-35mph on deceleration[coasting],I've had the dash out 3 times insulating various brackets with cloth tape,also per service manual I've checked clearance on the AIR pipe to brake line & fuel line...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.