I have one Brand New corvette frame purchased from the factory in 1980. The frame has never been out of storage until now. It was purchased as part # 6258366 from the GM dealer part book rev .5-80. For someone doing a points restoration,this is what you want. It is still factory coated with the...
I have a set of NOS 1968-69 GM exhaust bezels for sale. If you are doing a NCRS or any judging resto these are for you. Asking $275 for the pair OBO. Part # 3922496-95. SOLD
Thanks for all the info. I may try it that way if I can't get enough help to lift it when I'm ready. This will be the second 69 in less than a year so practice makes perfect," I hope"
1968-74 NOS Clock F/S
I have a NOS GM white face clock for sale. It will fit a 68 to 74 Corvette but with the white numbers it belongs to a 72-74. The clock is brand new GM and only removed from the box to make sure it works. This will be a perfect restoration if you are going for judging. Fred
Hi, those "close" vent buttons are held on with a small allen set screw. Loosen the screw and pull up and off they come. The screw is located on the bottom front side under the flat side. The metal levers are rivited to a steel frame and not meant to be taken off. You can release the cables...
Hi Bob, you might want to talk to Jim Guck at Elmer's in Webster. I've done four or five windshield frames but not the complete cage. Jim has a Vette junk yard and numerous contacts in the field. You are in for a major challenge and best if you can find someone that has done it before to assist...
Geo, I'm just starting to inventory the parts I have. I'll put together a list with part #'s and we can work on it from there. You can email me anytime. Fred
Hi, I just purchased some NOS parts for the 69. I'll be selling them to someone who is doing a judging resto or one who needs factory parts for their resto. I'm sure I have all the chrome pieces and the spare tire lock and cover. Possibly many more items you might need. Most still have the...
If you are still looking for the frame,try Elmers in Webster. If he doesn't have one he could probably get you one. I've bought three from him inthe last couple years. Also if you can't make it to Carlisle he might find one for you there. Fred
I've had a Bend Pak 6000lb lift for two years and will never work without one now. Mine lifts to 53 inches without the adapters and 6 foot with the truck adapters. I've done motor changes,trannys and exhaust with no problems. You can also get oil drain cans that fit under it for routine...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.