Search results

My right side sensor is in the left pipe, left is in the right. Is that normal? My right rear sensor isn't setting. I put short tube headers on my LS1. Check engine light comes on. Diagnosis is low pressure right bank. Right rear sensor not setting. I bought the after market adapter to fix the...

I've had the same problem. My right rear wheel had a slow leak. Tried everything. Re-chromed the wheel, fixed the problem! Sent from my SM-N960U using Tapatalk

Not that I know of! It was only 1997 - 2000 or 2001. It's actually a very easy fix. I did my 2000 in about 20 minutes. After installing the column lock bypass , LMC5 is the part to fix the rest of the problem. Sent from my SM-G930V using Tapatalk

You turn the idle mixture screws in all the way. Then back them out 1 3/4 - 2 turns, both screws. Start the car. Adjust the idle screw (automatic transmission 650 rpm) (standard transmission 750 rpm). Then turn the left idle mixture screw out untill highest rpm is achieved. Turn back in (for...

Hit me up if you need directions on how to run the codes automatically. Sent from my SM-G900V using Tapatalk

Exactly the same fix for my car. Be sure to run the code check on your DIC and clear them. Sent from my SM-G900V using Tapatalk

👎👎

Try clearing your codes on your DIC. Turn the ignition to the on position. Press and hold reset to clear the DIC. Press and hold options and press fuel 4 times. Let it run through the codes. When it ends press and hold reset to clear codes. Then press options to manually go through the codes and...

You're welcome and again, thank you. Sent from my SM-G900V using Tapatalk

Thank you dadaroo. I didn't know what the twilight sentinel was. I turned it off and that fixed the problem. Thanks again. Sent from my SM-G900V using Tapatalk

Can someone please tell me why my headlights come on when I release the emergency brake. The headlights are in the off position and can't be turned off until I turn off the ignition. Then I turn the headlights on then off. Sent from my SM-G900V using Tapatalk

I think you're doing the right thing by taking it in to the professionals. I would first ask them where fuel regulator is on a Z06. I have an LS1. So they may be in different places. Good luck. Keep us posted! Sent from my SM-G900V using Tapatalk

Yes, dull. All I can think off is something wrong with the sensor in the bellows in which controls the timing. As dadaroo said, check all codes. Keep us posted. Sent from my SM-G900V using Tapatalk

Hopefully you sprayed MAF sensor cleaner in the MAF sensor. Carb cleaner will destroy the MAF sensor. Sent from my SM-G900V using Tapatalk

dadaroo, can you advise me if removing the honeycomb part of the MAF sensor is a idea for more performance on my 2000 LS1? lesf55

Buy removing the honeycomb part of the MAF sensor, will this increase performance? Or is it not recommended to remove this part? lesf55

Can someone tell me if removing the honeycomb part of the MAF sensor on a 2000 corvette LS1 is advisable for more performance. lesf55

R.I.P. Zippy. lesf55

Very beautiful car. lesf55

That's devotion lesf55