Search results

For the small hairline scratch, use one of the watery liquid type roller tip pens from an office supply store. I used the pilot G-2 07 pen and it worked perfectly. Of course, I don't know the longevity of the fix as yet but it looks good for now.

Anyone found a company that gives a good discount for multiple vehicles? I have two pickups, two corvettes and a recently restored mercedes SL for which I am paying simply way too much insurance. I am the only driver. Why should I pay a token discount that really does not amount to much savings...

I am in need of a scanning program for my LT4 and '03 Z06 since I currently just have the LT1 edit tuner for the LT4. Also, I'll need a tuning program for the Z06. Is there a package combination out there that will scan LT4 and Z06 plus flash the Z06? thanks for all suggestions.

To spread the spindle assemblies apart, I used a 3/8 x 44" pipe with an eyebolt stuck in each end. The eyebolts need about 6" of threads. I bought mine at Tractor Supply. I connected them to the bottom knuckle of each spindle where the arm was attached and used a nut on each eyebolt to spread...

Best pull of 4 for a stock Z06 with 21K miles was 347.6HP/333.8 Torque. Owner of shop has a '02 Z06 and he saw the same for his. I read an article last year that posted the same numbers for their stock Z. Anyone that professes higher numbers for a stock Z, I really would need to see it for...

trade 1 or both for 2001 or up C5..... Let me know how much difference you want. thanks. http://www.geocities.com/donrix/Photo/1200csale.htm http://www.geocities.com/donrix/Photo/1200LTCsale.htm

One bike or both, partial trade or ?, ...Let's talk! http://www.geocities.com/donrix/Photo/1200csale.htm http://www.geocities.com/donrix/Photo/1200LTCsale.htm I prefer a 1999 or 2000 FRC, but am open to offers.

How many would be inerested in getting together at a dyno for a day of lt1 edit tuning on lt4's? I think it would be more beneficial for several cars to try a common tune that works with similar mods. No need for all of us to re-invent the wheel in our tuning efforts. Anyone interested?

Using dynojet for testing: Corsa, hotcam, SLP claw intake-315.7 HP/303.2 torque added Long Tube headers and random cats-330.7 HP/328.8 torque changed to 52mm TB-340.8 HP/ 334.5 torque notes: unplugging little vacuum fuel pressure thingamagiggy at the manifold as per Gordon Killebrew hurt...

On page 93, Dec. issue, it is stated that stock LT4 RPM at 70 in 6th should be 1200. Personally, mine runs around 17-1800. How about you guys? AFAIK, my rear end is stock gearing.

Stock LT4 except for hot cam, corsas and SLP 'claw' intake. 316 HP/ 303 torque. Friend suggested this would be the case. He has 382 HP LT4. He suggested long tube headers and high flow cats. (he should know). His mods include CNC'd LT4 heads shaved .30 and open exhaust with some port matching...

I know the throttle bodies are a little different in '96 from when they first came out. Anyone have a suggestion for a brand that is configured like the '96?

I just got back from testing here in Rutherford County. The kid plugged the jack into the OBD2 receptacle to check for codes. After 1000 miles since installation and running on Corsas with stock programming, I am happy to report I passed just fine. As I drove off the kid said,"I sure like the...

The sequential injector bodies are bathed in raw gas for cooling purposes and cleaners can destroy protective coating on coil wiring and destroy injectors. This problem is only encountered on 1996 (OBD2) and up from my understanding. Use the stuff only sparingly. I might add that I have used...

She sounded really good tonight after the new opti, water pump, Hot Cam, and extreme duty chain. Road trip tomorrow!!!!!

With only the hot cam in place and retaining plate tightened I have .12 inch of play front to back. How can I remedy this? What type shims are used?

I have researched quite a bit of information in the archives of corvetteforum but would like to know if anyone here has any thoughts on things to watch out for. I know about the water pump drive seal and the difficulty with the oil pan seal but what other things do I need to watch for? thanks.

Will I fail the emission test with a Hot Cam? In Rutherford county they use the OBDII connection for the test. Thanks.

At 65K miles the waterpump let go all at once completely soaking the front of the engine. Time for a Hot Cam. Anyone have knowledge of a thread or homepage with a step by step walk through of this procedure? I have the helms manuals but any information from one that has been there and done that...

I have a question for those that might have/or are experiencing this; it seems that there is a 'catch' sometimes when pressing the accelerator from the idle position. Not very pronounced but nevertheless it is detectable. I tried to remove the cover at the ASR but that doesn't seem to be a very...