Welcome to the Corvette Forums at the Corvette Action Center!

(1959) Windshield Moulding

Tom Bryant

Well-known member
Administrator
Joined
Nov 9, 2000
Messages
7,479
Location
Edgerton, Ohio, United States
Corvette
1959 black 270hp (9/2/69) 1981 Beige L81(10/20/80)
I have a small dent in the lower windshield moulding on the '59. It will require the moulding to be removed to repair. I don't have any need to remove the windshield assembly from the car or disassemble it. Does anyone know how to remove the moulding without damaging it.
Tom
 
Lower Windshield Molding

Tom

You will have to remove the windshield to get to the lower molding, unless I'm missing something.

GoodLuck
 
  • Thread starter
  • Moderator
  • #3
oh no!

I didn't want to hear that , David. I guess it wouldn't hurt to replace the seal under the windshield anyway. I might even replace the dash pad while I'm in there.

Tom
 
Dash Pad

Tom

Let me know if you would like to see the Al Knoch Dash Pad Instilation Video.
 
Tom, David is right. I'm in the middle of that now.................I'd like yo see that movie:)...........Steve
 
  • Thread starter
  • Moderator
  • #6
windshield removal

Thanks David, It will be a while before I'm ready but I'll take you up on the Al Knock vidio then.

Tom
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom