1966 power brakes master cylinder

[vintagecorvette]

I finally got myself the correct PB master cylinder for my car, however it lacks any of the parts. Does anyone know if there is a crossover piston that i can get to install?

 

[IH2LOSE]

The picture comes up as a red X on my computer.

But if I understand correct.You just have the cast iron casting and now you need the guts/internal componets?

 

[vintagecorvette]

exactly, I got the cast housing, but no guts.

 

[IH2LOSE]

I would try white post restorations and see what they can do I would think the guts may be as hard to find as the master itself.

What did you pay for just the casting?

 

[vintagecorvette]

It cost me 5 big bills. Not cheap, but cheaper than the one I saw at Carlisle and the 2 other I found parts dealers were selling. :ugh

 

[JohnZ]

LICS has the complete rebuild kit for the '65-'66 power brake master cylinder, with all the pistons and seals, for $40.00. However, I wouldn't install the parts unless the bore is PERFECT, or it'll damage the seals.

 

[vintagecorvette]

Thanks John

The MC will be sleeved if it checks out NG. I have a fellow who did the one on my 1957 and it turned out perfect.


Thanks
oWEN

 

[IH2LOSE]

LICS has the complete rebuild kit for the '65-'66 power brake master cylinder, with all the pistons and seals, for $40.00. However, I wouldn't install the parts unless the bore is PERFECT, or it'll damage the seals.

Boy thats great,