Help! 1974 Corvette

[madjoe2x]

I am trying to replace the bulbs in the dash, i have everything loose, steering column bolts off. It looks like there are just clips that pull away from body skin but im having a hard time and am afraid to break something. Do i have to pull harder from one side to free it?
Any help would be appreciated

Joe

 

[paz72vette]

I am trying to replace the bulbs in the dash, i have everything loose, steering column bolts off. It looks like there are just clips that pull away from body skin but im having a hard time and am afraid to break something. Do i have to pull harder from one side to free it?
Any help would be appreciated

Joe

Did you disconnect the speed - tach cable? Also the vacuum lines go thru the fire wall. Also one ground wire that is attached to the drivers door pillar. Replacing the bulbs is a PITA.

 

[madjoe2x]

1974 Vette

Did you disconnect the speed - tach cable? Also the vacuum lines go thru the fire wall. Also one ground wire that is attached to the drivers door pillar. Replacing the bulbs is a PITA.

Thanks for your help, i thought there would be more play. I did get it off,..put a heater core in( A/C ) thought it would a good time to replace the bulbs...6 hour job. Much Appreciated!!