Welcome to the Corvette Forums at the Corvette Action Center!

1979 emblem application

S

schoeassoc

Guest
We just received our new front and side emblems for the vette. They all have the guide pins and adhesive attached to the back. The previous emblems that we took off just had the adhesive. It looks like the previous owner used a grinder on the pins and just used the adhesive. How should they be applied and do they all need speed nuts? Also, does the rear bumber have to be removed to attach the rear emblem ?

Thanks for input. Bill
 

Tom Bryant

Well-known member
Administrator
Joined
Nov 9, 2000
Messages
7,323
Location
Edgerton, Ohio, United States
Corvette
1959 black 270hp (9/2/69) 1981 Beige L81(10/20/80)
Welcome to the CAC Bill,

The fenders should have the holes for the emblems. You might need to measure someone elses car or check a Assembly Instruction Manual for the exact location. I have removed the rear emblem on our '81 to clean behind it with no problem. There was good access to the rear.

Tom
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Parts/Accessories:

Vetteskins

Advertise with the Corvette Action Center!

Double Your Chances!

Partners

Top Bottom