81 door locks

[94conv.]

I have the windows going up and down pretty well now and had the drivers side door lock operating smoothly but when I went over to the passenger side, two of the three black wires came apart, I thought I fixed it with a worked over bullet connector over the connector but now neither side works, anyone have any ideas, the fuses are all good and there is power to the passenger side switch. Would a new switch do the trick? Im not sure how the switches are tied together but the drivers side was working flawlessly until the wires broke loose.
And thanks for the advise ive gotten on here on this car so far.

 

[94conv.]

Guys, I have it figured to be the switch but the terminals all broke off so Im figuring out a new way to attache the wires to the switch. Trial and error I suppose now.

 

[Kens 80]

Guys, I have it figured to be the switch but the terminals all broke off so Im figuring out a new way to attache the wires to the switch. Trial and error I suppose now.

several of the corvette suppliers have a replacement pig tail wire asy to repair the door lock wires and they are pretty cheap.